
TrueStrike42
byungyoonc/TrueStrike42
TrueStrike42 is a columnar staggered unibody split keyboard designed to maximize performance and minimize finger fatigue.

A mechanical keyboard build on YD-RP2040 with an OLED display and backlights
YDR7-Keyboard is an open-source printed circuit board by Jan3385, from the Jan3385/YDR7-Keyboard repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 418.3 × 124.6 mm with 424 parts on 243 nets, routed with 3,423 tracks and 816 vias.
It is built around the 74AHCT125D and SK6812MINI-E. Its parts include 206 diodes, 105 capacitors, 103 switches, 2 resistors and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
A mechanical keyboard build on YD-RP2040 with an OLED display and backlights
Build for MX switches
A sligthly modified 96% keyboard layout with 4 extra keys for managing onboard firmware (103 keys total)


It's a keyboard with a customisable OLED that helps to manage, and control parts of the firmware like changing backlighting color, showing typing speed and much more
The firmware is also open-source so anyone can customise and add features to their keyboard


The keyboard uses a custom PCB with the YD-RP2040 attached to it providing a USB-C connection along with power to the board
The YD-RP2040 is the devboard with a chip running this project. You may be able to use a standard Raspberry PI pico but that was not tested
The keyboard is comprised out of 3 parts. The panel which holds the switches, a back panel and a front panel
Due to their size its impossible to print an entire piece at once, thats why there are sliced versions in the CAD/Sliced folder. You can print them separately and then weld them with a soldering iron together. You should weld the front and the back piece but not the panels as they are held together by the frame anyway

[!WARNING] Due to the size of the keyboard, even the sliced version requires 216 x 139 mm or larger printing plate
[!NOTE] You should have CMAKE and GCC installed along with Arm embedded GNU Toolchain
arm-none-eabi-gcc
For compilation run the following commands in the project folder: Note that the first command may take a while as it is downloading the SDK from git
cmake -S Firmware -B Firmware/build -G "Ninja"
cmake --build Firmware/build --target Keyboard_Firmware
To load the firmware into the RP2040 chip, press the BOOT button on the YD-RP2040 devboard and plug it into your computer. It should appear as a drive in which you insert the Keyboard_Firmware.uf2 file inside the Firmware/build/ folder. The keyboard should reboot itself and load the active firmware
To reflash the board just repeat the steps above
| Product name | Product description | Product link | Product unit cost inc. Tax (€) | Product amount | Product total cost (€) | Running total (€ with tax and shipping) |
|---|---|---|---|---|---|---|
| YD-RP2040 | RPI pico-like microcontroller board | Link | 2.99 € | 1 | 2.99 € | 2.99 € |
| 74AHCT125DR | Logic level shifter IO | Link | 3.01 € | 1 | 3.01 € | 6.00 € |
| 100nF 0805 Ceramic Capacitor (>= 6.3V) | Decoupling capacitor | Link | 0.02 € | 105 | 1.82 € | 7.82 € |
| 10kΩ 0805 Resistor | Pull-up resistor | Link | 0.02 € | 2 | 0.04 € | 7.85 € |
| 1N4148W Diode | Keyboard matrix diode | Link | 0.02 € | 103 | 1.77 € | 9.63 € |
| Kailh Hot-Swap Sockets for Gateron x103 | PCB sockets for switches | Link | 8.24 € | 1 | 8.24 € | 17.87 € |
| Gateron Switch G Pro 3.0 | Mechanical keyboard switches | Link | 0.37 € | 103 | 38.11 € | 55.98 € |
| 1.5 Inch OLED Display 128x128 I2C | OLED Screen | Link | 4.25 € | 1 | 4.25 € | 60.23 € |
| SK6812 Mini RGB LED x200 | Backlight LEDs | Link | 3.38 € | 2 | 6.76 € | 66.99 € |
| Keycap set | set of keycaps for keyboard | Link | 16.93 € | 1 | 16.93 € | 83.92 € |
| M3x8 screws | screws for PCB and case assembly | Link | 0.05 € | 8 | 0.40 € | 84.32 € |
| Hot melt inserts MxL4xOD4.2 | inserts for case assembly | Link | 0.11 € | 8 | 0.88 € | 85.20 € |
| Silicone feet 12x3mm x4 | anti-slip feet for case | Link | 0.72 € | 1 | 0.72 € | 85.92 € |
| PCB | w/o assembly (estimate) | Link | 40.00 € | 1 | 40.00 € | 125.92 € |
| Qty | Value | Footprint | References |
|---|---|---|---|
| 105 | 100nF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C10, C11, C12, C13, C14, C15, C16, C17, C18, C100, C101, C102, C103, C104, C105 +89 |
| 103 | Diode | ScottoKeebs_Components:Diode_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D100, D101, D102, D103 +87 |
| 103 | SK6812MINI | ScottoKeebs_Components:LED_SK6812MINI | D104, D105, D106, D107, D108, D109, D110, D111, D112, D113, D114, D115, D116, D117, D118, D119 +87 |
| 90 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_1.00u | S2, S10, S11, S12, S13, S16, S17, S18, S19, S20, S21, S22, S100, S101, S102, S103 +74 |
| 3 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_1.25u | S40, S41, S42 |
| 2 | 4k7 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2 |
| 2 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_1.75u | S15, S39 |
| 2 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_1.50u | S1, S14 |
| 2 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_2.00u_90deg | S93, S94 |
| 2 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_2.25u | S27, S28 |
| 1 | 74AHCT125 | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U1 |
| 1 | Conn_OLED_I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J2 |
| 1 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_6.25u | S43 |
| 1 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_2.00u | S61 |
| 1 | YD-RP2040 | Module:RaspberryPi_Pico_Common_SMD | A1 |
The 419 most common of 424 parts.

byungyoonc/TrueStrike42
TrueStrike42 is a columnar staggered unibody split keyboard designed to maximize performance and minimize finger fatigue.

joshjetson/phosphor
A full fledged DAW in TUI and GUI flavors: Run it in the terminal or run it as a desktop app (Desktop App Coming Soon..maybe)

Broccoliux/Broccoli-board
A fully custom 100% mechanical keyboard with a custom black PCB, hot-swap clicky switches, and full RGB where every internal component is hand soldered and nothing is by assemble.

byungyoonc/TrueStrike56
TrueStrike56 is a columnar staggered unibody split hall effect keyboard with popular 4x6_4 layout.


HashirX-ux/Nexus
A customizable mechanical macropad for productivity, shortcuts, and macros. Built with QMK firmware support.

atoomnetmarc/n-teller-xl-diy
n-teller-xl-diy is an IoT device that displays the number of checked in participants and visitors at the hackerspace called Revelation Space (or RevSpace).

It measures 418.3 × 124.6 mm and has 2 copper layers, 1.6 mm thick.
424 parts, built around the 74AHCT125D and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Jan3385/YDR7-Keyboard repository on GitHub, at the commit this page was made from: the board is PCB/PCB.kicad_pcb and its schematic PCB/PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).