

VC5 schematic
A universal USB hardware for Windows programmed in C++
- Size
- 216 × 60 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 33
- Nets
- 68
- Pads
- 214
- Tracks, vias
- 429, 57
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 3 Oct 2024
- Updated
- 7 Mar 2025
Overview
VC5 schematic is an open-source printed circuit board by Jan-3007, from the Jan-3007/Project_VC_5 repository on GitHub, published under the MIT licence. It is a 2-layer board of 216 × 60 mm with 33 parts on 68 nets, routed with 429 tracks and 57 vias.
It is built around the MCP23017-E/SS, PEC11R-4220F-S0024 and BC337. Its parts include 7 ICs, 5 capacitors, 5 resistors, 5 diodes and 1 transistor. It belongs with the RP2040 boards of this library.
Main components
3MCP23017-E/SS
SSOP-28(5.3x10.2x0.65)-40℃~+125℃ 1.7MHz 1.8V~5.5V 16 1uA 600mV 8 8mA I2C Interrupt Output Reset function、Cascading and address extension SSOP-28 I/O Expanders ROHSMicrochip TechnologyI/O ExpandersPEC11R-4220F-S0024
插件插件 Rotary Encoders ROHSBournsRotary EncodersBC337
TO-92-31 NPN 100 100MHz 100nA 45V 5V 625mW 700mV 800mA NPN TO-92-3 Bipolar (BJT) ROHSFoshan Blue Rocket ElecBipolar (BJT)
README
README.mdProject VC 5
Note: This project is the base for my upcoming project VC 5 and won't be updated anymore. Please see ... for an up-to-date version.
General description
The aim of this project is to create an external device, which allows the user to adjust a variety of settings (e.g. volume, display brightness, settings within a program, ...) on a host PC.
Hardware
A number of rotaries are available as input (number set to 5 within the config file of this project) and LED's and displays to show any kind of status. The schematic for the device can be found at Harware/schematic.
Software
The software consists of two parts.
1. Firmware
The firmware is written for the Raspberry Pi RP2040. It communicates via USB with the host PC. The firmware only transmits data from the rotaries to the host PC and executes commands from the host PC. These commands can for example set the color of the LED and change the content shown on the displays.
2. PC application
The PC application (only Windows) acts as the executing intelligence. It takes the data from the rotaries and processes it. In this case, as a demo, the volume of five different artificial audio channels is controlled. The application can also send commands to the device to e.g. set the LED color or write information on the displays.
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 1.3in SH1106 OLED | Waveshare_displays:WaveShare_1in3_OLED_SH1106 | U2, U3, U4, U5, U6 |
| 5 | 1u | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C1, C2, C3, C4, C5 |
| 5 | APA-106-F5 | WS2812_LED_THT:LED_D5.0mm-4_RGB | D1, D2, D3, D4, D5 |
| 5 | PEC11R-4220F-S0024 | Bourns_PEC11R:PEC11R4220FS0024 | VR1, VR2, VR3, VR4, VR5 |
| 4 | , , , | ||
| 3 | 4k7 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R5 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | 2k2 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | BC337 | Package_TO_SOT_THT:TO-92_Inline_Wide | Q1 |
| 1 | Debug_output | Connector_PinSocket_2.54mm:PinSocket_1x02_P2.54mm_Vertical | J2 |
| 1 | MCP23017 | MCP23017_IO_expander:MCP23017_IO_expander | U7 |
| 1 | Pico | RPI_Pico_THT:RPi_Pico_THT | U1 |
Similar boards
- 2 layers230 × 70 mm

- 2 layers65 × 62 mm

- 2 layers100 × 100 mm

- 2 layers70 × 110 mm

Nucleo144 DSP
mnemocron/Nucleo-DSP-Shield
Audio DSP Shield for STM32 Nucleo-144 Boards (H723zg) based on the TLV320 CODEC
70 parts2GPL-3.0 - 2 layers79.4 × 66.1 mm

Macropad
axooexe/Macropad-s-PCB
This repository contains the schematics and PCB layout files for a custom 8switches and an encoder macropad.
19 parts1 - 4 layers47 × 106 mm

- 2 layers85 × 120 mm

Home Assistant Control pad
Pegoku/Home-Assistant-Control-pad
This is a programmable Home Assistant Control Pad. It can control 4 Home assistant devices at a time, and has 4 togglable screens/zones (in total 16 devices).
111 parts1GPL-3.0 - 4 layers92.8 × 76 mm

Deck-8
varaddorle007/deck-8
Open-source 8-key macro pad with 2 knobs, OLED and Bluetooth: PCB, case and ZMK firmware
101 parts1MIT
Questions
How big is the VC5 schematic PCB?
It measures 216 × 60 mm and has 2 copper layers, 1.6 mm thick.
What parts does the VC5 schematic use?
33 parts, built around the MCP23017-E/SS, PEC11R-4220F-S0024 and BC337. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the VC5 schematic KiCad files?
From the Jan-3007/Project_VC_5 repository on GitHub, at the commit this page was made from: the board is Hardware/schematic/VC5_schematic/VC5_schematic.kicad_pcb and its schematic Hardware/schematic/VC5_schematic/LEDs.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the VC5 schematic design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).