2 layers158 × 11 mm
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group
22 parts1.1kGPL-3.0
2 layers
Draft6
Jamesits/draft61Guitar to "MIC in" port converter.
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 22
- Nets
- 12
- Pads
- 45
- Tracks, vias
- 108, 13
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 21 Nov 2020
- Updated
- 21 Nov 2020
Overview
Draft6 is an open-source printed circuit board by Jamesits, from the Jamesits/draft6 repository on GitHub. It is a 2-layer board with 22 parts on 12 nets, routed with 108 tracks and 13 vias.
Its parts include 11 resistors, 7 capacitors, 2 transistors and 1 diode. It belongs with the audio and music boards of this library.
README
README.mddraft6
Guitar to "MIC in" converter.
This circuit converts a typical electric guitar's Hi-Z output (6.35mm) to a electret microphone input (3.5mm) on the normal sound card that usually come with your motherboard.
Compatibility
This circuit assumes your sound card provides a DC bias voltage.
Copyright
The circuit is designed by @diodep.
Parts
22| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 10μ | Capacitor_SMD:CP_Elec_5x5.4 | C1, C2, C3 |
| 3 | DNP | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R5, R6, R11 |
| 2 | 0.1μ | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C4, C5 |
| 1 | 100 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R8 |
| 1 | 100p | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C6 |
| 1 | 10K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R4 |
| 1 | 15K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R2 |
| 1 | 1K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R3 |
| 1 | 1M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R10 |
| 1 | 2.2M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | 2N3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | 2N3906 | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | 3.3K | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R9 |
| 1 | 4.7M | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R7 |
| 1 | DNP | Capacitor_SMD:CP_Elec_5x5.4 | C7 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D1 |
| 1 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1 |
Similar boards
- 2 layers57 × 65 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
22 parts1kGPL-3.0 - 2 layers81 × 57.2 mm
RP2040-Macropad
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
22 parts915 - 2 layers54.6 × 70.9 mm
BeagleLogic Cape
abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.
22 parts479GPL-3.0 - 2 layers66.4 × 24.5 mm
Connecting piece
Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!
22 parts456 - 2 layers51 × 70 mm
- 2 layers19.7 × 19.7 mm
- 2 layers27.8 × 16 mm
Spi 1v8 level shifter
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
22 parts253GPL-3.0
Questions
What parts does the Draft6 use?
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Draft6 KiCad files?
From the Jamesits/draft6 repository on GitHub, at the commit this page was made from: the board is kicad/draft6.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Draft6 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Jamesits before reusing the design.