2 layers77 × 55 mm
Accelerometer PCB
JamesRop/VIMS-Accelerometer-PCB
Files for a PCB for an accelerometer circuit for an ocean glider in the ocean sensing lab at the Virginia Institute of Marine Science
21 parts
2 layers76 × 56 mm
Accelerometer PCB (No Volt Reg)
JamesRop/VIMS-Accelerometer-PCBFiles for a PCB for an accelerometer circuit for an ocean glider in the ocean sensing lab at the Virginia Institute of Marine Science
- Size
- 76 × 56 mm
- Copper layers
- 2
- Thickness
- 1.63 mm
- Parts
- 21
- Nets
- 77
- Pads
- 133
- Tracks, vias
- 141, 48
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 10.0 (file 20260206)
- Created
- 22 Apr 2026
- Updated
- 2 Jul 2026
Overview
Accelerometer PCB (No Volt Reg) is an open-source printed circuit board by JamesRop, from the JamesRop/VIMS-Accelerometer-PCB repository on GitHub. It is a 2-layer board of 76 × 56 mm with 21 parts on 77 nets, routed with 141 tracks and 48 vias.
It is built around the M20-8770442. Its parts include 6 capacitors, 3 ICs, 3 connectors, 2 resistors and 2 switches. It belongs with the sensors and measurement boards of this library.
Main components
1Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | M3 Screw, M3 Screw, M3 Screw, M3 Screw |
| 3 | 100nF | Local Accelerometer Footprints:Large Decoupling Capacitor | C3, C4, C5 |
| 2 | 100kΩ | Local Accelerometer Footprints:RESC2012X60N | R1, R2 |
| 2 | SW_Push | Local Accelerometer Footprints:SW_TS04-66-43-BK-260-SMT | SW1, SW2 |
| 1 | 100nf | Local Accelerometer Footprints:Large Decoupling Capacitor | C2 |
| 1 | 100uF | Local Accelerometer Footprints:BulkCap | C1 |
| 1 | 10uF | Local Accelerometer Footprints:10uF External Input Cap | C6 |
| 1 | Adafruit DS3231 RTC | Local Accelerometer Footprints:Adafruit DS3231 Real Time Clock | U3 |
| 1 | M20-8770442 | Local Accelerometer Footprints:CONN4X1_NPTC041KFXC-RC_SUL | J2 |
| 1 | MolexMicroSD | Local Accelerometer Footprints:MicroSDMolex | J3 |
| 1 | Power Connector | Local Accelerometer Footprints:JST PH 2 pin Right Angle Connector | J1 |
| 1 | Schottky Diode | Local Accelerometer Footprints:onsemi Shottky Diode 20V 1A | D1 |
| 1 | Swan v3.0 | Local Accelerometer Footprints:Swan v3.0 Justin's Version | U1 |
| 1 | Sysrox Accelerometer | Accelerometer Footprints:Sysrox SRX-IMU00-DEV | U2 |
More from JamesRop/VIMS-Accelerometer-PCB
1Similar boards
- 2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
Questions
How big is the Accelerometer PCB (No Volt Reg) PCB?
It measures 76 × 56 mm and has 2 copper layers, 1.63 mm thick.
What parts does the Accelerometer PCB (No Volt Reg) use?
21 parts, built around the M20-8770442. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Accelerometer PCB (No Volt Reg) KiCad files?
From the JamesRop/VIMS-Accelerometer-PCB repository on GitHub, at the commit this page was made from: the board is Accelerometer PCB (No Volt Reg).kicad_pcb and its schematic Accelerometer PCB (No Volt Reg).kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Accelerometer PCB (No Volt Reg) design in my own project?
Its repository states no licence, so its author keeps all rights: ask JamesRop before reusing the design.