

SumoBotPCB
group design project sumobot for mechatronics
- Size
- 90 × 62.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 43
- Pads
- 134
- Tracks, vias
- 435, 43
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 18 Oct 2022
- Updated
- 2 Dec 2022
Overview
SumoBotPCB is an open-source printed circuit board by JamesM92, from the JamesM92/SumoBot_2022Fall-ME4543-OC1 repository on GitHub. It is a 2-layer board of 90 × 62.5 mm with 27 parts on 43 nets, routed with 435 tracks and 43 vias.
Its parts include 12 ICs, 4 capacitors, 3 resistors and 1 switch. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdSumoBot_2022Fall-ME4543-OC1
group design project sumobot for mechatronics
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | VL53L0X-GY530 | custom:VL53L0X-GY530 | U7, U8, U9, U10, U11, U12 |
| 4 | C_Polarized_US | Capacitor_THT:CP_Radial_D8.0mm_P5.00mm | C1, C2, C3, C4 |
| 4 | Motor_DC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | M1, M2, M3, M4 |
| 4 | QRE1113-LINE_SENSOR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | U3, U4, U5, U6 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R1 |
| 1 | 2K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P2.54mm_Vertical | R2 |
| 1 | 6V | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BAT1 |
| 1 | Arduino_Nano_Socket | Arduino:Arduino_Nano_Socket | XA1 |
| 1 | BC9VPC | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | BAT2 |
| 1 | R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P5.08mm_Vertical | R3 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1 |
| 1 | TB6612FNG | custom:tb6612fng | U1 |
| 1 | hc-05_BLUETOOTH_MODULE | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | U2 |
Similar boards
- 2 layers47.6 × 27.3 mm

- 2 layers77.4 × 77.4 mm

CORAZON LEDS CON FADE
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
27 parts915 - 2 layers44.2 × 29.3 mm

- 2 layers40 × 40 mm

- 2 layers22 × 42 mm

Nvme bm to e
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
27 parts253GPL-3.0 - 2 layers80 × 61 mm

PicoProducer
pjgpetecodes/pico-streamdeck
This project is an OBS Controller using a Raspberry Pi Pico and CircuitPython.
27 parts230MIT - 2 layers186 × 45 mm

AddOnD
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth
27 parts226CC-BY-SA-4.0 - 2 layers29.6 × 40.6 mm

Dbwifi revB
ugcs/ddc
Drone Show Software is software designed for drone shows, allowing flight path planning as well as control of dozens of drones simultaneously in a synchronized manner.
27 parts223
Questions
How big is the SumoBotPCB PCB?
It measures 90 × 62.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the SumoBotPCB use?
27 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the SumoBotPCB KiCad files?
From the JamesM92/SumoBot_2022Fall-ME4543-OC1 repository on GitHub, at the commit this page was made from: the board is PCB/SumoBotPCB/SumoBotPCB.kicad_pcb and its schematic PCB/SumoBotPCB/SumoBotPCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the SumoBotPCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask JamesM92 before reusing the design.