
Pedal
GasimovDev/guitar-pedal
A digital guitar pedal. Guitar in, an STM32 microcontroller runs three effects (overdrive, then tremolo, then delay), and the sound comes out to your amp. It has six knobs, three footswitches and three LEDs.

Minisumo robot with an opponent-lifting system
CalkaBot PCB is an open-source printed circuit board by JakubKivi, from the JakubKivi/CalkaBot3K0 repository on GitHub, published under the MIT licence. It is a 2-layer board of 82 × 98 mm with 39 parts on 44 nets, routed with 468 tracks and 23 vias.
It is built around the L6225PD, L78M05CDT-TR and 1N4148WT, with the KTIR0711S and SS14 among its other parts. Its parts include 11 capacitors, 9 resistors, 6 connectors, 4 diodes and 3 transistors. It belongs with the robots and motor control boards and the AVR (ATmega, ATtiny) boards of this library.
Całkabot 3k0 is a mini-sumo robot equipped with arms designed to lift the opponent. Taking advantage of the lack of size restrictions after the round begins, this beauty you see in the picture unfolds its lifting arms. In the photo, it's already in the fully deployed position.
More info here
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0u1 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C7, C9, C11, C12 |
| 3 | Conn_01x03_Pin | Connector_JST:JST_PH_B3B-PH-K_1x03_P2.00mm_Vertical | J1, J2, J3 |
| 2 | 100k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R6, R7 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R8, R9 |
| 2 | 1N4148WT | Diode_SMD:D_SOD-123 | D1, D2 |
| 2 | 20k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3 |
| 2 | 220 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R4, R5 |
| 2 | 5n6 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C5, C6 |
| 2 | KTIR0711S | CalkaBot3k0:KTIR0711S | Q1, Q2 |
| 1 | 0u33 | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 100R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 100u | Capacitor_SMD:CP_Elec_6.3x7.7 | C8 |
| 1 | 10n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3 |
| 1 | 200n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C4 |
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | BS108 | CalkaBot3k0:SOT-223-IRLL014NTRPBF | Q3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | L6225PD | CalkaBot3k0:L6225PD | CR1 |
| 1 | L78M05CDT-TR | L78M05CDT-TR:VREG_L78M05CDT-TR | U1 |
| 1 | LED | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D4 |
| 1 | MOTOR3 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Motor_Left | CalkaBot3k0:CalkBot3k0_Motor_Left | M2 |
| 1 | Motor_Right | CalkaBot3k0:CalkBot3k0_Motor_Right | M1 |
| 1 | SS14 | Diode_SMD:D_SMA_Handsoldering | D3 |
| 1 | SW_DIP_x04 | Button_Switch_THT:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W7.62mm_P2.54mm | SW1 |
| 1 | StartModule | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J6 |

GasimovDev/guitar-pedal
A digital guitar pedal. Guitar in, an STM32 microcontroller runs three effects (overdrive, then tremolo, then delay), and the sound comes out to your amp. It has six knobs, three footswitches and three LEDs.



konrad1s/LineFollower-Kwark
Fast LineFollower Robot project. Build on STM32 F7 microcontroller with custom PCB. Software, Hardware and QT Application.

WojciechNowakowski/PCB-designs
Container for PCB designs created by me (in KiCad software mostly)

rimio/cat-a-hack
Prototyping board for PC/μC to transceiver isolation.

Forestierr/Light_trainer
Light pour l'entrainement sportif, physique et mental.
/Custom%20Inverter%20PCB/Custom%20Inverter%20PCB.kicad_pcb.jpg?size=s&soon)
MiniNugen/Custom_Inverter_Hardware
PCBProjectNameREV1.PrjPCB | Source Documents | | PCBProjectNameREV1.SchDOC | | PCBProjectNameREV1.PcbDOC | | BOM | Settings | Libraries
It measures 82 × 98 mm and has 2 copper layers, 1.6 mm thick.
39 parts, built around the L6225PD, L78M05CDT-TR, 1N4148WT and KTIR0711S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JakubKivi/CalkaBot3K0 repository on GitHub, at the commit this page was made from: the board is KiCad_v3/CalkaBot_PCB.kicad_pcb and its schematic KiCad_v2/CalkaBot_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).