2 layers99.1 × 41.9 mm
2 layers37 × 42 mm
OscilliscopArt
JacobChrist/HackadayS8-OscilliscopeArthttps://hackaday.io/project/198922-oscilloscope-art-at-hackaday-supercon-8
- Size
- 37 × 42 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 19
- Pads
- 40
- Tracks, vias
- 82, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 20 Oct 2024
- Updated
- 24 Jun 2025
Overview
OscilliscopArt is an open-source printed circuit board by JacobChrist, from the JacobChrist/HackadayS8-OscilliscopeArt repository on GitHub. It is a 2-layer board of 37 × 42 mm with 10 parts on 19 nets, routed with 82 tracks and 0 vias.
It is built around the MCP4902-E/P. Its parts include 3 connectors, 1 capacitor and 1 IC.
Main components
1README
README.mdOscilloscope Art at Hackaday Supercon8 (2024)
This project is documented here:
https://hackaday.io/project/198922-oscilloscope-art-at-hackaday-supercon-8
This repo contains supporting schematics, code and spreadsheets (or at least that's the plan)
Some notes from markusthegeek:
Be sure to use the Earle Philhower library for the Pi Pico with the Arduino IDE. You must press the boot button when powering the board to program it the first time when using the Arduino IDE.
When you clone the repo use the "sip-header-code" branch if you want to use it with the S8 Hackaday Badge
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | Conn_01x09 | Package_SIP:SIP-9_22.3x3mm_P2.54mm | J1, J2 |
| 1 | C | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P2.50mm | C1 |
| 1 | Conn_02x03_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical | J3 |
| 1 | LOGO | Lab7-Art:oscilloscope-art-at-hackaday-supercon-8 | G*** |
| 1 | MCP4902 | Package_DIP:DIP-14_W7.62mm_LongPads | U1 |
| 1 | PONTECH-10mm-12mm | a_pontech:PONTECH-10mm-12mm | ART1 |
The 7 most common of 10 parts.
Similar boards
- 4 layers100 × 100 mm
- 2 layers57 × 55.2 mm
LogicAnalyzer
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
10 parts5.1kGPL-3.0 - 2 layers32.2 × 15.4 mm
Protector
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.
10 parts4.3kMIT - 2 layers14.4 × 10.1 mm
Q3Q SWAB A1-00 Temperature + Test Points + OPT3001
joeycastillo/Sensor-Watch
A board replacement for the classic Casio F-91W wristwatch
10 parts2.1k - 2 layers26 × 18 mm
- 2 layers44.3 × 30.5 mm
Lime2-SATA RevA
OLIMEX/OLINUXINO
OLINUXINO is Open Source / Open Hardware, low cost from EUR 24 Linux Industrial grade Single Board Computer capable to operate -25+85C
10 parts1.5k - 2 layers150 × 50 mm
Breakout 55pin 963063-15-Connector
rusefi/rusefi
rusefi - GPL internal combustion engine control unit
10 parts1.2k
Questions
How big is the OscilliscopArt PCB?
It measures 37 × 42 mm and has 2 copper layers, 1.6 mm thick.
What parts does the OscilliscopArt use?
10 parts, built around the MCP4902-E/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the OscilliscopArt KiCad files?
From the JacobChrist/HackadayS8-OscilliscopeArt repository on GitHub, at the commit this page was made from: the board is KiCAD/OscilliscopArt.kicad_pcb and its schematic KiCAD/OscilliscopArt.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the OscilliscopArt design in my own project?
Its repository states no licence, so its author keeps all rights: ask JacobChrist before reusing the design.