

Power meter rev
คำอธิบายสั้นๆ: โปรเจคนี้เป็นงานออกแบบแผงวงจร PCB สำหรับเครื่องวัดพลังงาน (power meter) โดยใช้ KiCad
- Size
- 340 × 235 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 67
- Nets
- 45
- Pads
- 265
- Tracks, vias
- 587, 78
- Pours
- 8
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 5 Oct 2025
- Updated
- 5 Oct 2025
Overview
Power meter rev is an open-source printed circuit board by JackPoramet, from the JackPoramet/pcb_power repository on GitHub, published under the MIT licence. It is a 2-layer board of 340 × 235 mm with 67 parts on 45 nets, routed with 587 tracks and 78 vias.
It belongs with the sensors and measurement boards and the ESP32 boards of this library.
README
README.mdชื่อโปรเจค: power_meter
คำอธิบายสั้นๆ: โปรเจคนี้เป็นงานออกแบบแผงวงจร PCB สำหรับเครื่องวัดพลังงาน (power meter) โดยใช้ KiCad
โครงสร้างไฟล์หลัก:
power_meter_rev.kicad_sch— ไฟล์สเกมาติกของ KiCadpower_meter_rev.kicad_pcb— ไฟล์ PCB ของ KiCadLib/— ไลบรารีชิ้นส่วนและโมเดล 3Dbom/— Bill of Materials ที่สร้างออกมาOutput/— ผลลัพธ์การส่งออก (Gerber, PDFs)
Parts
67| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | SANOFF, SANOFF, SANOFF, STANOFF, STANOFF, STANOFF, STANOFF, STANOFF, STANOFF, STANOFF, STANOFF, STANOFF, STANOFF, STANOFF, STANOFF, STANOFF |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 2 | 15EDGRC-3.5-3P-PAK | 15EDGRC-3.5-3P:15EDGRC-3.5-3P-PAK | RS485, RS485 |
| 1 | Converter_ACDC_Hi-Link_HLK-20Mxx | Converter_ACDC:Converter_ACDC_Hi-Link_HLK-20Mxx | HLK-20M05 |
| 1 | ETHERNET | WIZ850IO:WIZ850IO | ETHERNET |
| 1 | LED_D3.0mm | LED_THT:LED_D3.0mm | LED_Status |
| 1 | R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P2.54mm_Vertical | R |
| 1 | XCVR_ESP32-S2-DEVKITM-1U | ESP32-S2-DEVKITM-1U:XCVR_ESP32-S2-DEVKITM-1U | ESP32 WROOM |
The 26 most common of 67 parts.
Similar boards
- 2 layers138.1 × 114.3 mm

- 2 layers133.1 × 53.8 mm

- 2 layers160 × 100.1 mm

Ardumower mega shield svn
Ardumower/ardumower
Develop an open source robotic lawn mower (HW+SW reference platform)
67 parts282 - 2 layers65 × 56 mm

Zpui shld wg12864b
CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
67 parts253GPL-3.0 - 2 layers138.1 × 89.7 mm

- 2 layers51 × 30 mm

- 2 layers93.5 × 55 mm

- 2 layers58.4 × 101.6 mm

Questions
How big is the Power meter rev PCB?
It measures 340 × 235 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Power meter rev use?
67 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power meter rev KiCad files?
From the JackPoramet/pcb_power repository on GitHub, at the commit this page was made from: the board is power_meter_rev.kicad_pcb and its schematic power_meter_rev.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power meter rev design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).