
Encoder
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

Mechanical, electrical, and software design files for the TrueTip. Derivative of the OPEnS eDNA project.
PE1 - PCB Layout is an open-source printed circuit board by JackJordan1, from the JackJordan1/TrueTip repository on GitHub. It is a 2-layer board of 20 × 20 mm with 7 parts on 4 nets, routed with 13 tracks and 0 vias.
Its parts include 2 resistors, 2 connectors and 1 capacitor.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H1, H2 |
| 1 | 0.5K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 1u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1 |
| 1 | 22K | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | SolderWire 2POS | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm | J2 |
| 1 | SolderWire 3POS | Connector_Wire:SolderWire-0.1sqmm_1x03_P3.6mm_D0.4mm_OD1mm | J1 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.



AxxAxx/AxxSolder
STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power


jamro/tiny-engineer
A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

It measures 20 × 20 mm and has 2 copper layers, 1.6 mm thick.
7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the JackJordan1/TrueTip repository on GitHub, at the commit this page was made from: the board is PCB Files/PE1 - PCB Layout.kicad_pcb and its schematic PCB Files/PE1 - PCB Schematic.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask JackJordan1 before reusing the design.