Skip to the content
2 layers155.5 × 66 mmMisoContinuityTester, the printed circuit board in 3D
Size
155.5 × 66 mm
Copper layers
2
Thickness
1.6 mm
Parts
21
Nets
70
Pads
158
Tracks, vias
293, 6
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
15 May 2025
Updated
2 Jun 2025

Overview

MisoContinuityTester is an open-source printed circuit board by IsaiahBunsley, from the IsaiahBunsley/MisoContinuityTester repository on GitHub. It is a 2-layer board of 155.5 × 66 mm with 21 parts on 70 nets, routed with 293 tracks and 6 vias.

Its parts include 11 connectors, 2 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.

README

README.md

MisoContinuityTester

Parts

21
QtyValueFootprintReferences
4MountingHoleMountingHole:MountingHole_4.3mm_M4H1, H2, H3, H4
2INPUTTerminalBlock:TerminalBlock_Xinya_XY308-2.54-10P_1x10_P2.54mm_HorizontalJ4, J5
2OUTPUTTerminalBlock:TerminalBlock_Xinya_XY308-2.54-10P_1x10_P2.54mm_HorizontalJ10, J11
2R_USResistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P5.08mm_HorizontalR1, R2
2~addedItems:Adafruit MCP23017U1, U2
1Arduino_Nano_EveryModule:Arduino_NanoA1
1FAILTerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_HorizontalJ6
1LOGOLOGOG***
1PASSTerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_HorizontalJ7
1POWER 5V-12VTerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_HorizontalJ8
1POWER SWITCHTerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_HorizontalJ3
1STARTTerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_HorizontalJ9
1TYPE1TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_HorizontalJ12
1TYPE2TerminalBlock_Phoenix:TerminalBlock_Phoenix_MPT-0,5-2-2.54_1x02_P2.54mm_HorizontalJ13

Similar boards

  • 2 layers28.3 × 39.8 mmLevelShifter, the printed circuit board in 3D

    LevelShifter

    gusmanb/logicanalyzer

    24 channel, 100Msps logic analyzer hardware and software

    21 parts5.1kGPL-3.0
  • 2 layers171.2 × 72.9 mmAmiga gfxcard before pour, the printed circuit board in 3D

    Amiga gfxcard before pour

    mntmn/amiga2000-gfxcard

    MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog

    21 parts1k
  • 2 layers93.9 × 46 mmRectifier, the printed circuit board in 3D

    Rectifier

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    21 parts990GPL-3.0
  • 2 layers45.5 × 42.9 mmEsphome han reader, the printed circuit board in 3D

    Esphome han reader

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    21 parts915
  • 2 layers31.8 × 14.5 mmEsp prog, the printed circuit board in 3D

    Esp prog

    drandyhaas/KiCadRoutingTools

    A set of Python/Rust tools to aid routing in KiCad

    21 parts744MIT
  • 2 layers23.5 × 15.8 mmQuiverAttachPCB, the printed circuit board in 3D

    QuiverAttachPCB

    Arrow-air/project-quiver

    Project Quiver documentation, designs, and project artifacts.

    21 parts617CERN-OHL-S-2.0
  • 2 layers69.9 × 41.3 mmHeaterMeterLCD, the printed circuit board in 3D

    HeaterMeterLCD

    CapnBry/HeaterMeter

    HeaterMeter and LinkMeter Arduino BBQ Controller

    21 parts557MIT
  • 2 layers161.3 × 111.8 mmDoj, the printed circuit board in 3D

    Doj

    kelu124/echomods

    Open source ultrasound processing modules and building blocks

    21 parts463

Questions

How big is the MisoContinuityTester PCB?

It measures 155.5 × 66 mm and has 2 copper layers, 1.6 mm thick.

What parts does the MisoContinuityTester use?

21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MisoContinuityTester KiCad files?

From the IsaiahBunsley/MisoContinuityTester repository on GitHub, at the commit this page was made from: the board is MisoContinuityTester.kicad_pcb and its schematic MisoContinuityTester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MisoContinuityTester design in my own project?

Its repository states no licence, so its author keeps all rights: ask IsaiahBunsley before reusing the design.