
TEMP ctrl
Ironman-007/Thermal_control
Due to my research, I always need to measure, log, and control the temperature of the environment during some experiment, such as TVAC test, etc. So I think it would be great to have a standard Kit to do this.

Due to my research, I always need to measure, log, and control the temperature of the environment during some experiment, such as TVAC test, etc. So I think it would be great to have a standard Kit to do this.
TEMP ctrl DS18B20 is an open-source printed circuit board by Ironman-007, from the Ironman-007/Thermal_control repository on GitHub. It is a 2-layer board of 74 × 76 mm with 66 parts on 61 nets, routed with 199 tracks and 464 vias.
It is built around the AP2112K-3.3, IRLZ44N and ECS-160-12-33-AGN-TR3. Its parts include 23 connectors, 18 resistors, 12 capacitors, 6 transistors and 2 ICs. It belongs with the STM32 boards of this library.
Due to my research, I always need to measure, log, and control the temperature of the environment during some experiment, such as TVAC test, etc. So I think it would be great to have a standard Kit to do this. I made this for my personal usage, with 4 channels of RTD to measure temeprature and 4 channels of heater control.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 691412320003 | Mylib:691412320003 | J10, J11, J12, J13, J14, J15, J16, J17, J18 |
| 6 | 100nF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C4, C5, C6, C10 |
| 6 | 10kΩ | PCM_JLCPCB:R_1206 | R3, R5, R23, R24, R25, R26 |
| 6 | 10Ω | PCM_JLCPCB:R_1206 | R2, R4, R19, R20, R21, R22 |
| 6 | 691412320002 | Mylib:691412320002 | J1, J2, J3, J4, J8, J9 |
| 6 | IRLZ44N | Package_TO_SOT_THT:TO-220-3_Vertical | Q1, Q2, Q3, Q4, Q5, Q6 |
| 4 | 18pF | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C22, C23, C24, C26 |
| 4 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J19, J20, J21, J23 |
| 2 | 10uF | PCM_JLCPCB:C_1206 | C1, C7 |
| 2 | 1kΩ | PCM_JLCPCB:R_1206 | R6, R7 |
| 2 | 4.99kΩ | PCM_JLCPCB:R_1206 | R27, R28 |
| 2 | Conn_01x01_Pin | TestPoint:TestPoint_Pad_4.0x4.0mm | J5, J6 |
| 2 | LED_Small_Filled | LED_SMD:LED_1206_3216Metric | D1, D2 |
| 1 | 0Ω | PCM_JLCPCB:R_1206 | R15 |
| 1 | 32KHz | Crystal:Crystal_SMD_3215-2Pin_3.2x1.5mm | Y2 |
| 1 | 4.7kΩ | PCM_JLCPCB:R_1206 | R1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U3 |
| 1 | ECS-160-12-33-AGN-TR3 | Mylib:XTAL_ECS-160-12-33-AGN-TR3 | Y3 |
| 1 | LCD | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J7 |
| 1 | LOGO | LOGO | G*** |
| 1 | STM32G431CBTx | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10104110_Horizontal | J22 |

Ironman-007/Thermal_control
Due to my research, I always need to measure, log, and control the temperature of the environment during some experiment, such as TVAC test, etc. So I think it would be great to have a standard Kit to do this.


abd-alaj/BLDC-motor-custom-inverter
Matlab, Simulink, Hardware and C-code for a custom inverter project.

Faulty404/SLD_Pen-Pad
The circuit uses an LM358 op-amp to amplify signals from a microphone and includes battery charging capabilities using the TP4057 charger IC.




pscrespo/Morpheus-STM32
A small 3D printer controller board for use with a "blue pill" STM32F1 generic board. Inspired on http://reprap.org/wiki/SinapTec

It measures 74 × 76 mm and has 2 copper layers, 1.6 mm thick.
66 parts, built around the AP2112K-3.3, IRLZ44N and ECS-160-12-33-AGN-TR3. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Ironman-007/Thermal_control repository on GitHub, at the commit this page was made from: the board is PCB/TEMP_ctrl_DS18B20/TEMP_ctrl_DS18B20.kicad_pcb and its schematic PCB/TEMP_ctrl/TEMP_ctrl.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Ironman-007 before reusing the design.