Skip to the content
2 layers362 × 138.1 mmWaleed Keeb Final, the printed circuit board in 3D

I am a custom keyboard for hackclub keeb

Size
362 × 138.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
188
Nets
149
Pads
682
Tracks, vias
576, 8
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
9 Jun 2026
Updated
15 Jun 2026

Overview

Waleed Keeb Final is an open-source printed circuit board by Ibne-billa, from the Ibne-billa/custom-keyboard repository on GitHub. It is a 2-layer board of 362 × 138.1 mm with 188 parts on 149 nets, routed with 576 tracks and 8 vias.

Its parts include 84 diodes, 84 switches and 1 resistor. It belongs with the keyboards and input boards and the RP2040 boards of this library.

README

README.md

custom-keyboard

Hi, I am building a custom keyboard for the HackClub Keeb project. Huge thanks to HackClub for giving me this opportunity to finally bring this idea to life.

For the past ~4 months, my laptop keyboard has had broken G and H keys. The replacement was very expensive, and typing on it became really frustrating. This project is my way of solving that problem while also learning PCB design and embedded systems.

Thanks again to HackClub for giving me a platform where I can express myself and build something useful instead of just dealing with a broken keyboard.

Design Overview

My design is fairly simple and practical.

I am using a Raspberry Pi Pico as the main controller. The keyboard layout is based on Cool84. I have also added support for an RGB LED strip, which I plan to connect later for lighting effects. Keyboard Layout: image

PCB Design Process

  1. Keyboard Matrix Design

First, I created the switch matrix for the keyboard.

image
  1. RGB Strip Connection

Then I designed the connections for the RGB LED strip.

image 3. Full Pico Integration

After that, I connected everything to the Raspberry Pi Pico.

image

PCB Assembly (Most Challenging Part)

The hardest part of this project was assembling everything properly in the PCB editor.

In my first design, I made many mistakes:

Forgot to add mounting holes Placed the Pico on the wrong side Messed up multiple nets and connections

After a lot of trial and error, I finally managed to create a clean design with no major errors.

image Final PCB

Here is the final PCB design:

image Case Design

Next, I started working on the case. Compared to the PCB, this part was easier because the design is simple.

The case has:

Bottom plate Side walls Space for a clear top sheet (for aesthetics and protection) image image

Final Note

This project has been a big learning experience for me in PCB design, embedded systems, and hardware development. I made mistakes, fixed them, and learned a lot through the process.

Note on writing: English is not my first language. I used ChatGPT only to improve the grammar and structure of this README. All ideas, design work, PCB development, and project decisions were done by me without AI assistance.

Parts

188
QtyValueFootprintReferences
841N914Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +68
84SW_PushPCM_marbastlib-mx:SW_MX_1uSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +68
10MountingHole_PadMountingHole:MountingHole_2.2mm_M2_Pad_TopBottomH1, H2, H3, H4, H5, H6, H7, H8, H9, H10
3MountingHoleMountingHole:MountingHole_2.2mm_M2H7, H9, H10
2MX_stabPCM_marbastlib-mx:STAB_MX_P_2.25uSEnter1, SLeftShift1
1330 OhmResistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_HorizontalR1
1Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalRGB_Strip_Connector1
1MX_stabPCM_marbastlib-mx:STAB_MX_P_2uSBackSpace1
1MX_stabPCM_marbastlib-mx:STAB_MX_P_6.25uSSpace1
1RaspberryPi_Pico_WModule:RaspberryPi_Pico_Common_THTA1

Similar boards

  • 2 layers213 × 65 mmSizif512, the printed circuit board in 3D

    Sizif512

    UzixLS/zx-sizif-512

    ZX Spectrum CPLD-based clone for rubber case

    188 parts195MIT
  • 2 layers243.4 × 76.7 mmSteamvan, the printed circuit board in 3D

    Steamvan

    jmdaly/steamvan

    KiCAD design files for the SteamVan PCB - a 40% keyboard PCB based on an STM32 MCU

    188 parts76CC-BY-SA-4.0
  • 2 layers99.7 × 99.7 mmDrummaster rev2, the printed circuit board in 3D

    Drummaster rev2

    thebiguno/microcontroller-projects

    A home for a bunch of microcontroller projects which don't warrant their own repos.

    188 parts75
  • 2 layers338.1 × 135 mmSeigaiha, the printed circuit board in 3D

    Seigaiha

    yiancar/Seigaiha

    A Alice layout throughole keyboard with USBC. Inspired by the Plaid and TGR Alice

    188 parts64
  • 2 layers322.7 × 132.7 mmBloomer, the printed circuit board in 3D

    Bloomer

    cozykeys/bloomer

    An 87 key ergonomic mechanical keyboard

    188 parts61MIT
  • 2 layers232.2 × 76.7 mmCpm43, the printed circuit board in 3D

    Cpm43

    Gtrx0/cpm43

    40% mechanical keyboard with rgb underglow and single color backlight

    188 parts59
  • 2 layers97 × 99 mmProto quarter panel, the printed circuit board in 3D

    Proto quarter panel

    jamesmunns/brick-mount

    Put your circuits on your plastic bricks of choice

    188 parts40

Questions

How big is the Waleed Keeb Final PCB?

It measures 362 × 138.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Waleed Keeb Final use?

188 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Waleed Keeb Final KiCad files?

From the Ibne-billa/custom-keyboard repository on GitHub, at the commit this page was made from: the board is Waleed_Keeb_Final/Waleed_Keeb_Final.kicad_pcb and its schematic Waleed_Keeb_Final/KeyBoard_Matrix.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Waleed Keeb Final design in my own project?

Its repository states no licence, so its author keeps all rights: ask Ibne-billa before reusing the design.