
Carte embarque
INSA-GEI/Helicoptere
Modèle hélicoptère développé au GEI et utilisé en automatique 4éme année GEI

Modèle hélicoptère développé au GEI et utilisé en automatique 4éme année GEI
Carte base is an open-source printed circuit board by INSA-GEI, from the INSA-GEI/Helicoptere repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 96 × 53 mm with 43 parts on 40 nets, routed with 523 tracks and 53 vias.
It is built around the TS9224IDT. Its parts include 13 capacitors, 6 resistors, 5 connectors, 3 ICs and 3 diodes. It belongs with the STM32 boards of this library.
Modèle hélicoptère développé au GEI et utilisé en automatique 4éme année GEI
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 100nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C2, C5, C6, C14 |
| 4 | 10µF | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C1, C7, C8, C13 |
| 4 | 22nF | Capacitor_SMD:C_1206_3216Metric_Pad1.42x1.75mm_HandSolder | C15, C16, C17, C18 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_ISO14580_Pad | H1, H2, H3, H4 |
| 2 | 100R | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R6, R7 |
| 2 | 1K | Resistor_SMD:R_Array_Convex_4x0603 | RN1, RN3 |
| 2 | 1K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R3, R5 |
| 2 | BAT754S,125 | Package_TO_SOT_SMD:SOT-23 | D2, D3 |
| 2 | Conn_01x02 | Connector_JST:JST_VH_B2PS-VH_1x02_P3.96mm_Horizontal | J2, J3 |
| 2 | Conn_01x02 | Insa:DF3A-2P-2DS | J4, J5 |
| 1 | 100 | Resistor_SMD:R_Array_Convex_4x0603 | RN2 |
| 1 | 100µH | Inductor_SMD:L_Bourns-SRN6028 | L1 |
| 1 | 10mH | Inductor_SMD:L_Wuerth_WE-PD2-Typ-L | L2 |
| 1 | 15µF | Capacitor_Tantalum_SMD:CP_EIA-7343-31_Kemet-D | C3 |
| 1 | 2,7K | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R4 |
| 1 | 2,7k | Resistor_SMD:R_1206_3216Metric_Pad1.42x1.75mm_HandSolder | R2 |
| 1 | 2.4K | Resistor_SMD:R_Array_Convex_4x0603 | RN4 |
| 1 | 5.6µH | Inductor_SMD:L_1812_4532Metric_Pad1.30x3.40mm_HandSolder | L3 |
| 1 | Conn_01x04 | Insa:DF3A-4P-2DS | J1 |
| 1 | DAC7554 | Package_SO:MSOP-10_3x3mm_P0.5mm | U2 |
| 1 | D_Schottky_AAK | Package_TO_SOT_SMD:TO-277A | D1 |
| 1 | FSMRA3JH04 | Button_Switch_THT:SW_Tactile_SPST_Angled_PTS645Vx58-2LFS | SW1 |
| 1 | Jumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged2Bar_RoundedPad1.0x1.5mm | JP1 |
| 1 | STM32L031 | Insa:STM32-Nucleo-32 | U1 |
| 1 | TS9224IDT | Package_SO:SOIC-14_3.9x8.7mm_P1.27mm | U3 |

INSA-GEI/Helicoptere
Modèle hélicoptère développé au GEI et utilisé en automatique 4éme année GEI

google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards

rusefi/rusefi
rusefi - GPL internal combustion engine control unit


jrsteensen/OpenHornet
OpenHornet 1:1 F/A-18C Simulator Repository


tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!

nodestark/mdb-esp32-cashless
ESP32-based MDB cashless device for vending machines, supporting EVA DTS DEX/DDCMP telemetry and payments over the MDB protocol via Bluetooth and MQTT

zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...
It measures 96 × 53 mm and has 2 copper layers, 1.6 mm thick.
43 parts, built around the TS9224IDT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the INSA-GEI/Helicoptere repository on GitHub, at the commit this page was made from: the board is pcb/carte_base/carte_base.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).