

Ecoder arduino nano V0.1
A way to connect reliably the encoder with the arduino through a pcb
- Size
- 50 × 47 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 3
- Nets
- 31
- Pads
- 40
- Tracks, vias
- 36, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 8 Jun 2019
- Updated
- 17 Jun 2019
Overview
Ecoder arduino nano V0.1 is an open-source printed circuit board by HydrocontestEPFL, from the HydrocontestEPFL/Encoder_Arduino_PCB repository on GitHub. It is a 2-layer board of 50 × 47 mm with 3 parts on 31 nets, routed with 36 tracks and 0 vias.
Its parts include 1 IC and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
README
README.mdEncoder_Arduino_PCB
Basic PCB design to connect the encoder to an arduino nano more reliable than with wires. Also helps to avoid messy cabling.
Parts
3| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | Arduino_Nano_v2.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x04_Female | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | EMS22A_B-style | EMS22A_b-style:EMS22A_B-style | U1 |
Similar boards
- 2 layers40 × 30 mm

- 2 layers51.9 × 16 mm

Passive2-rpi non standard adapter
hzeller/rpi-rgb-led-matrix
Controlling up to three chains of 64x64, 32x32, 16x32 or similar RGB LED displays using Raspberry Pi GPIO
3 parts4.4kGPL-2.0 - 2 layers16.3 × 16.3 mm

- 2 layers

Sub
atopile/atopile
Design circuit boards with code! ✨ Get software-like design reuse 🚀, validation, version control and collaboration in hardware; starting with electronics ⚡️
3 parts4kMIT - 2 layers85 × 30 mm

- 2 layers124.5 × 33.7 mm

- 2 layers10.5 × 83 mm

- 2 layers21.2 × 51.3 mm

Pico reset
hackclub/sprig
🍃 Learn to code by making games in a JavaScript web-based game editor.
3 parts1.1kMIT
Questions
How big is the Ecoder arduino nano V0.1 PCB?
It measures 50 × 47 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Ecoder arduino nano V0.1 use?
3 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Ecoder arduino nano V0.1 KiCad files?
From the HydrocontestEPFL/Encoder_Arduino_PCB repository on GitHub, at the commit this page was made from: the board is Encoder_arduino_nano_wout-level-shifter/Ecoder_arduino_nano_V0.1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Ecoder arduino nano V0.1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask HydrocontestEPFL before reusing the design.