
Pcb rs485
HydroVinci-PULV/MicroTransat
Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.

Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.
Capteurs environnement is an open-source printed circuit board by HydroVinci-PULV, from the HydroVinci-PULV/MicroTransat repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.1 × 83 mm with 22 parts on 53 nets, routed with 102 tracks and 26 vias.
It belongs with the RP2040 boards of this library.
Ceci est une ébauche de l'architecture finale des systèmes embarqués du bateau.
Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.
Note : Les protocoles de communications entre les différents composants ne sont pas représentatifs de la réalité puisque le choix des composants n'est pas définitif à ce stade.

Considérant que notre bateau autonomme puisse être apparenté à un drone, nous avons fait le choix d'utiliser un flight controller comme ordinateur de bord. C'est pourquoi nous utilisons au sein de notre architecture de navigation un BeagleBone Blue choisit pour sa compatibilité avec
.
Vous trouverez plus d'information sur le BeagleBone Blue sur la page dédiée dans le wiki du projet.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | ~ | Connectors:JST_SH4 | U2, U3, U4, U5, U6 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U1 |
The 6 most common of 22 parts.

HydroVinci-PULV/MicroTransat
Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.

HydroVinci-PULV/MicroTransat
Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.

HydroVinci-PULV/MicroTransat
Cette présentation de l'architecture est amenée à évoluer en fonction des besoins du projet.

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 99.1 × 83 mm and has 2 copper layers, 1.6 mm thick.
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HydroVinci-PULV/MicroTransat repository on GitHub, at the commit this page was made from: the board is Electronique/PCB/Capteurs/capteurs-environnement/capteurs-environnement.kicad_pcb and its schematic Electronique/PCB/Capteurs/capteurs-environnement/capteurs-environnement.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).