
Daylight Matchstick
VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

ESP-WROOM-02 Break Out Board.
ESP WROOM-02 BreakOut is an open-source printed circuit board by HsaSheep, from the HsaSheep/HsESP02 repository on GitHub, published under the MIT licence. It is a 2-layer board of 25 × 40 mm with 22 parts on 22 nets, routed with 220 tracks and 13 vias.
Its parts include 6 resistors, 4 diodes, 4 connectors, 4 switches and 2 ICs. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | 10k | Resistors_SMD:R_0603_HandSoldering | R1, R2, R3, R4, R5, R6 |
| 2 | CONN_01X09 | Pin_Headers:Pin_Header_Straight_1x09_Pitch2.54mm | J2, J4 |
| 2 | CRD_18mA | Diodes_SMD:D_1206 | D1, D2 |
| 1 | Logo:HsSheep_5.8x5.8mm | ||
| 1 | CONN_01X04 | Pin_Headers:Pin_Header_Straight_1x04_Pitch2.54mm | J5 |
| 1 | IO12_Jump | conn-test:JUMPER-SOLDER-3mm | J3 |
| 1 | LED_BLUE | LEDs:LED_0805 | LED2 |
| 1 | LED_GREEN | LEDs:LED_0805 | LED1 |
| 1 | NJM2845DL1 | NJM2845:NJM2845 | U1 |
| 1 | SW_Push_BOOT0 | HsMouse:SW_DIP_x1_W7.62mm_Slide_MOD_TVBP06-B043C_0.8x1.2_noSilks | SW1 |
| 1 | SW_Push_GPIO12 | HsMouse:SW_DIP_x1_W7.62mm_Slide_MOD_TVBP06-B043C_0.8x1.2_noSilks | SW4 |
| 1 | SW_Push_RESET | HsMouse:SW_DIP_x1_W7.62mm_Slide_MOD_TVBP06-B043C_0.8x1.2_noSilks | SW2 |
| 1 | SW_SPDT_WROOM-02_POWER | Pin_Headers:Pin_Header_Straight_1x03_Pitch2.54mm | SW3 |
| 1 | WROOM-02 | wroom-02:WROOM-02 | U2 |
The 21 most common of 22 parts.

VoronDesign/Voron-Hardware
Cool Hardware designed by the Voron Design group

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

abhishek-kakkar/BeagleLogic
A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

Chrismettal/flipper-zero-backpacks
Backpack-style addon boards for the Flipper Zero!



CRImier/MyKiCad
My KiCad boards. Can't be bothered uploading individually anymore, so here you go.
It measures 25 × 40 mm and has 2 copper layers, 1.6 mm thick.
22 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HsaSheep/HsESP02 repository on GitHub, at the commit this page was made from: the board is KiCad/ESP-WROOM-02_BreakOut.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).