
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

A translucent macropad, with 9 key layout, a knob and an OLED screen.
My first keyboard! is an open-source printed circuit board by HridhaanDaCoder, from the HridhaanDaCoder/My-First-Macropad repository on GitHub. It is a 2-layer board of 76.2 × 78.7 mm with 21 parts on 20 nets, routed with 154 tracks and 0 vias.
Its parts include 10 switches, 9 diodes and 2 ICs. It belongs with the keyboards and input boards of this library.
A custom 9-key programmable macropad designed from scratch as my first hardware project.
This is my first hardware project. I wanted to learn how a real custom keyboard goes from an idea to a physical PCB and enclosure.
I designed the schematic and PCB in KiCad and designed the case in Fusion 360.
| Component | Quantity |
|---|---|
| Seeed XIAO | 1 |
| Mechanical switches | 9 |
| 1N4148 diodes | 9 |
| Rotary encoder | 1 |
| OLED display | 1 |
hardware/ - PCB and schematiccase/ - enclosure filesfirmware/ - keyboard firmwaredocs/ - build documentation| Qty | Value | Footprint | References |
|---|---|---|---|
| 9 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D2, D3, D4, D5, D6, D7, D8, D9 |
| 9 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9 |
| 1 | ER_OLEDM0.91_1x-I2C | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | U2 |
| 1 | MOUDLE-SEEEDUINO-XIAO | Connector_PinHeader_2.54mm:PinHeader_2x07_P2.54mm_Vertical | U1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Bourns_Horizontal_PEC09-2xxxF-Sxxxx | SW10 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 76.2 × 78.7 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HridhaanDaCoder/My-First-Macropad repository on GitHub, at the commit this page was made from: the board is My first keyboard!.kicad_pcb and its schematic My first keyboard!.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask HridhaanDaCoder before reusing the design.