
Nrf bga
github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!

A spectrum analyzer display for HUB75 RGB LED panels and I2S microphones
Matrix is an open-source printed circuit board by HorstBaerbel, from the HorstBaerbel/HubAlyzer repository on GitHub, published under the MIT licence. It is a 2-layer board of 63.5 × 82.6 mm with 12 parts on 32 nets, routed with 110 tracks and 15 vias.
Its parts include 5 connectors and 1 IC. It belongs with the lEDs and displays and audio and music boards and the ESP32 boards of this library.
!!! WORK IN PROGRESS !!!
An ESP32 spectrum analyzer display for HUB75 RGB LED panels and I2S microphones (INMP441). Uses the ESP32 Arduino core, the Smartmatrix v4 RGB LED panel library, my fork of Ivan Kostoski I2S microphone library and my development version of the ArduinoFFT library.
The circuit is using the SmartMatrix "forum pinout" without any level shifters for the LED matrix. This is working fine for me for two 32x16 matrices chained together. It includes the "E" pin for driving 64x64 matrices.
See the KiCad directory for the PCB files. You can upload the PCB file straight to e.g. Aisler.net and get some pretty PCBs made.
Edit HubAlyzer/network_config.h and put your WiFi network and password there. Make sure NOT to commit the file and upload to GitHub when forking the repo!
Recently there were some problems with SmartMatrix and the ESP32 Arduino libraries, see this.
If the Arduino IDE fails to connect to the board / upload the code, see this.
If you want to build your own soft- or hardware based on this, you can. See the MIT LICENSE.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | Screw_Terminal_01x02 | TerminalBlock_RND:TerminalBlock_RND_205-00012_1x02_P5.00mm_Horizontal | J3, J5 |
| 1 | Conn_01x04_Male | Connector_JST:JST_EH_S4B-EH_1x04_P2.50mm_Horizontal | J2 |
| 1 | Conn_01x06_Male | Connector_JST:JST_EH_S6B-EH_1x06_P2.50mm_Horizontal | J1 |
| 1 | Conn_02x08_Odd_Even | Connector_IDC:IDC-Header_2x08_P2.54mm_Horizontal | J4 |
| 1 | KiCad logo | Symbol:KiCad-Logo_6mm_SilkScreen | H6 |
| 1 | Lolin32 | footprints:Lolin32 | U1 |
| 1 | OH logo | Symbol:OSHW-Logo2_14.6x12mm_SilkScreen | H5 |

github-linguist/linguist
Language Savant. If your repository's language is being reported incorrectly, send us a pull request!


google/mozc-devices
Circuit diagrams and firmware source code for Gboard DIY keyboards



hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

VoronDesign/Voron-Tap
Tap is a nozzle-based z-probe for the V2 and Trident printer designs. The entire toolhead moves to trigger an optical switch. Tap offers many advantages:

stacksmashing/pico-tpmsniffer
A simple, very experimental TPM sniffer for LPC bus
It measures 63.5 × 82.6 mm and has 2 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HorstBaerbel/HubAlyzer repository on GitHub, at the commit this page was made from: the board is KiCad/Matrix.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).