
Left pcb v1
HolyErgo/likeeb
Split wireless 36-key board with hotswap Gateron low profile switches on Xiao BLE

Split wireless 36-key board with hotswap Gateron low profile switches on Xiao BLE
Matrix pcb rev1 is an open-source printed circuit board by HolyErgo, from the HolyErgo/likeeb repository on GitHub. It is a 2-layer board of 208.1 × 102.5 mm with 90 parts on 92 nets, routed with 560 tracks and 65 vias.
Its parts include 40 switches and 36 diodes. It belongs with the keyboards and input and lEDs and displays boards of this library.


The curve, stagger, and rotation of the columns provide maximum ergonomics. All keys are easily pressed without moving the base of the hand (for M-L hand size).
Thanks to the low profile, the keyboard is comfortable to use without wrist rests and tents.
Placing the controller under the palm allows for convenient keyboard positioning on either side of a laptop, even on a small café table.
400mAh battery lasts more than a month. I haven’t been able to measure exactly how long, because I always forget when I last charged it :) With the new ZMK firmware using Bluetooth Low Energy protocol, one charge might last 3-4 months.
It’s very convenient for designing various mounts. You only need to attach a 0.6mm thick metal ring to the mount. Compared to a magnetic mount, this ring is very thin and much cheaper.

For example, I made a mount for an IKEA garden chair that is only 2mm thick. I simply attached it to the armrest of the chair and created a comfortable workspace: IKEA chair holder.stl
The magnetic spacer connects two halves of the keyboard and protects the keys from accidental presses. I don’t even turn off the keyboard when I put it in my backpack.

| Qty | Value | Footprint | References |
|---|---|---|---|
| 36 | SmdDiode | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +20 | |
| 36 | MX | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +20 | |
| 4 | Bridge holes 6 x 1mm | _9, _10, _11, _12 | |
| 4 | HKWClamshellSocket | _1, _3, _5, _7 | |
| 2 | Seeeduino XIAO nRF52840 | , | |
| 2 | power_switch | SW1, SW3 | |
| 2 | sw_reset_side | SW2, SW4 | |
| 2 | BatteryPad | BAT1, BAT2 | |
| 2 | MountingHole_2.2mm_M2_Pad_Via | _4, _8 |

HolyErgo/likeeb
Split wireless 36-key board with hotswap Gateron low profile switches on Xiao BLE

HolyErgo/likeeb
Split wireless 36-key board with hotswap Gateron low profile switches on Xiao BLE

HolyErgo/likeeb
Split wireless 36-key board with hotswap Gateron low profile switches on Xiao BLE

HolyErgo/likeeb
Split wireless 36-key board with hotswap Gateron low profile switches on Xiao BLE
HolyErgo/likeeb
Split wireless 36-key board with hotswap Gateron low profile switches on Xiao BLE
HolyErgo/likeeb
Split wireless 36-key board with hotswap Gateron low profile switches on Xiao BLE
HolyErgo/likeeb
Split wireless 36-key board with hotswap Gateron low profile switches on Xiao BLE
HolyErgo/likeeb
Split wireless 36-key board with hotswap Gateron low profile switches on Xiao BLE


carrefinho/forager
34-key wireless split keyboard inspired by ZSA Voyager

PantsForBirds/adsbee
Open Source Embedded ADS-B Receiver



siderakb/ergo-snm-keyboard
ErgoSNM is a split ergonomic keyboard integrated with trackball, wireless is in beta

zynthian/zynthian-hw
Zynthian hardware stuff: PCBs, schemes, parts specifications, pin assignment, ...

It measures 208.1 × 102.5 mm and has 2 copper layers, 1.6 mm thick.
90 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HolyErgo/likeeb repository on GitHub, at the commit this page was made from: the board is pcbs/edited/matrix_pcb_rev1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask HolyErgo before reusing the design.