Skip to the content
4 layers95.6 × 59.9 mmFlight computer rocketry, the printed circuit board in 3D

Hardware files for universal flight controller for small UAV's.

Size
95.6 × 59.9 mm
Copper layers
4
Thickness
1.6 mm
Parts
145
Nets
234
Pads
687
Tracks, vias
1,457, 210
Pours
4
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
16 Dec 2023
Updated
4 Apr 2024

Overview

Flight computer rocketry is an open-source printed circuit board by Himanshukohale22, from the Himanshukohale22/Flight_control_controller_V1.2 repository on GitHub, published under the MIT licence. It is a 4-layer board of 95.6 × 59.9 mm with 145 parts on 234 nets, routed with 1,457 tracks and 210 vias.

It is built around the AT7456E, ESP32-PICO-D4 and NRF24L01, with the TPS54233D, BMP280 and CH340G among its other parts. Its parts include 56 capacitors, 26 resistors, 24 connectors, 11 ICs and 9 diodes. It belongs with the ESP32, STM32 and RISC-V boards of this library.

Main components

8

README

README.md

Flight_control_controller_V1.2

Hardware files for universal flight controller for small UAV's.

image

BOARD SPECIFICATION.


  • STM32f7 cortex M4 based on board microcontroller for precision and fligt data simulation.
    • Core: Arm® 32-bit Cortex®-M7 CPU with FPU
    • Six-stage dual-issue pipeline • Dynamic branch prediction • Harvard caches (8 Kbytes of I-cache and 8 Kbytes of D-cache) • 64-bit AXI4 interface • 64-bit ITCM interface • 2x32-bit DTCM interfaces
  • sensors
    • MPU9250.(IMU)
      • 9-axis of freedom. (6 are used).
      • accerelometer an gyroscopic values
      • Higher calibration precision.
      • for statbility and orientation of board/vehicle.
      • configured with SPI1.
    • BMP280 .(Barometer)
      • configured with I2C .
      • barometer for altitude calculations . helps to hover the flight.
      • absolutely accurate p = 950 -- 1100 hPa.
    • NRF module
      • nrf module for communication upto 1km.
      • configured with SPI2.
    • BLE
    • WIFI
    • Servo motors
    • GPS support
    • Perhipherals
      • UART X2
      • I2C X1
      • SPI X1
      • CAN X1
    • Power
      • 3V3 sensor support
      • 5V support
      • usbB mini for testing testing.
      • jst connector i/p from 12v to 27v .
    • OSD (On screen display)
    • SD card support
    • for programme the ,board include four pins ckl , io , pwr , gnd as in 1.27mm pins(SWD). use ST-LINK.

Top Layer

image

Bottom Layer

image

Parts

145
QtyValueFootprintReferences
17100nfCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC3, C4, C5, C26, C27, C30, C31, C32, C42, C45, C46, C51, C52, C53, C54, C55 +1
11100pfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC11, C12, C13, C14, C24, C25, C44, C47, C48, C49, C50
101kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1, R2, R5, R11, R12, R15, R20, R21, R25, R26
5blueLED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolderD2, D4, D5, D6, D9
40.1ufCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC34, C37, C38, C39
412pfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC9, C10, C18, C19
4Conn_01x01_PinPADS:1-PINJ2, J14, J18, J19
4Conn_01x03_PinConnector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_VerticalJ5, J7, J11, J12
4MountingHole_PadMountingHole:MountingHole_2.7mm_M2.5_Pad_ViaH1, H2, H3, H4
310ufCapacitor_SMD:CP_Elec_4x3C1, C28, C40
31KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR18, R22, R23
3Conn_01x04_PinConnector_JST:JST_EH_S4B-EH_1x04_P2.50mm_HorizontalJ9, J27, J28
3Conn_01x06_PinConnector_JST:JST_EH_S6B-EH_1x06_P2.50mm_HorizontalJ10, J31, J32
3D_ZenerDiode_SMD:D_2010_5025Metric_Pad1.52x2.65mm_HandSolderD1, D3, D7
3USB_B_MiniConnector_USB:USB_Micro-B_Molex_47346-0001J1, J15, J16
20.1ufCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC29, C36
213.3KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR7, R14
2169KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR6, R13
21nfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC17, C33
248KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR8, R19
2Conn_01x02_MaleConnector_JST:JST_EH_S2B-EH_1x02_P2.50mm_HorizontalJ13, J17
2Jumper_2_BridgedJumper:SolderJumper-2_P1.3mm_Open_Pad1.0x1.5mmJP1, JP2
2SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW2, SW3
2TPS54233Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU6, U8
11.5pfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC21
11.8nfCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC7
11.96KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR10
110KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR3
110kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR9
110nfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC16
110pfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC6
1150RResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR17
11pfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC22
12.7nHInductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolderL3
122kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR4
122nfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC20
122pfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC35
122uHInductor_SMD:L_6.3x6.3_H3L4
129nHInductor_SMD:L_6.3x6.3_H3L5
13.3nfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC15
13.5nHInductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolderL2
14.7pfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC23
147nHInductor_SMD:L_1206_3216Metric_Pad1.22x1.90mm_HandSolderL6
147ufCapacitor_SMD:C_1210_3225Metric_Pad1.33x2.70mm_HandSolderC43
168pfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC8
175RResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR16
18.2kResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR24
18.2nHInductor_SMD:L_1206_3216Metric_Pad1.42x1.75mm_HandSolderL1
18.2nfCapacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolderC41
18.2ufCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U7
1AT7456Eat7456:SOP65P640X120-29NIC1
1Antenna_ChipConnector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_VerticalAE1
1BMI160Package_LGA:Bosch_LGA-14_3x2.5mm_P0.5mmU2
1BMP280Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumberingU3
1CH340GPackage_SO:SOIC-16_3.9x9.9mm_P1.27mmU4
1Conn_01x03_PinConnector_JST:JST_EH_S3B-EH_1x03_P2.50mm_HorizontalJ6
1Conn_01x04_PinConnector_JST:JST_EH_B4B-EH-A_1x04_P2.50mm_VerticalJ4
1Conn_01x06_PinConnector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMDJ3
1Conn_CoaxialConnector_Coaxial:WR-MMCX_Wuerth_66012102111404_VerticalJ8
1CrystalCrystal:Crystal_SMD_3215-2Pin_3.2x1.5mmY3
1Crystal_GND23Crystal:Crystal_SMD_0603-4Pin_6.0x3.5mmY2
1Crystal_GND23_SmallCrystal:Crystal_SMD_0603-4Pin_6.0x3.5mmY1
1ESP32-PICO-D4Package_DFN_QFN:QFN-48-1EP_7x7mm_P0.5mm_EP5.3x5.3mmU9
1LED_RGBLED_SMD:LED_RGB_5050-6D8
1Micro_SD_Card_Det2Connector_Card:microSD_HC_Molex_104031-0811J29
1NEO-8QRF_GPS:ublox_NEOU10
1NRF24L01Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mmU5
1STM32F722VCTxPackage_QFP:LQFP-100_14x14mm_P0.5mmU1
1SW_Push_Dual_x2Button_Switch_SMD:SW_SPST_TL3342SW1

Similar boards

  • 6 layers158 × 158 mmFpv drone, the printed circuit board in 3D

    Fpv drone

    zeodotdev/zeo-boards

    ESP32-S3 development board with onboard BME280 (temperature, humidity, pressure) and LSM6DS3 (6-axis IMU) sensors. This repo contains the designs, ESP-IDF firmware, and a Python plotter for visualization.

    158 parts3
  • 4 layers64.6 × 57.3 mmDragonfly, the printed circuit board in 3D

    Dragonfly

    Broccoliux/dragonfly

    A very cool, drone that can perform maneuvers.

    246 parts2MIT
  • 2 layers38.6 × 90.3 mmBioElectricalSensor, the printed circuit board in 3D

    BioElectricalSensor

    CGrassin/biosignals

    Board for the acquisition of bio-potentials (EMG, ECG, EEG, etc.).

    107 parts15MIT
  • 4 layers100 × 51.5 mmSTM32 CONTROLLER DESIGN, the printed circuit board in 3D

    STM32 CONTROLLER DESIGN

    shreyadascoder2004/stm32-can-modbus-gateway

    4-layer STM32 industrial gateway bridging RS-485/Modbus-RTU and CAN — KiCad schematic/layout + C firmware

    51 parts1MIT
  • 6 layers39.7 × 48.2 mmKicad Cansat, the printed circuit board in 3D

    Kicad Cansat

    Mathou7/2627_Projet2A_Cansat

    84 parts
  • 2 layers25.4 × 25.4 mmRecitation buck converter, the printed circuit board in 3D

    Recitation buck converter

    silaswaxter/senior_design_buck_converter

    A buck converter PCB design based on TI's TPS54233 IC

    22 parts
  • 2 layers41 × 42 mmMini Air FC, the printed circuit board in 3D

    Mini Air FC

    darshg321/Mini-Air

    Mini-Air is a DIY FPV drone! it features: - a custom flight controller supporting Betaflight - an ESC supporting Bluejay firmware - ELRS protocol - an analog camera - GPS

    101 parts2CERN-OHL-W-2.0

Questions

How big is the Flight computer rocketry PCB?

It measures 95.6 × 59.9 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Flight computer rocketry use?

145 parts, built around the AT7456E, ESP32-PICO-D4, NRF24L01 and TPS54233D. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Flight computer rocketry KiCad files?

From the Himanshukohale22/Flight_control_controller_V1.2 repository on GitHub, at the commit this page was made from: the board is Hardware files/flight_computer_rocketry.kicad_pcb and its schematic Hardware files/SHEET4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Flight computer rocketry design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).