
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

! 1:16 channel PCB relay demux
RelayBoard is an open-source printed circuit board by HikariBoy, from the HikariBoy/RelayDemuxBoard repository on GitHub. It is a 2-layer board with 21 parts on 84 nets, routed with 219 tracks and 0 vias.
It is built around the TPL9202PWP. Its parts include 8 switches, 4 capacitors, 4 connectors, 1 resistor and 1 IC.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | G5V-2 | Adrian:G6K-2P-Y | K1, K2, K3, K4, K5, K6, K7, K8 |
| 4 | C1uf | Capacitor_THT:C_Radial_D4.0mm_H5.0mm_P1.50mm | C2, C3, C4, C5 |
| 1 | Chassis | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP3 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J7 |
| 1 | Conn_02x04_Counter_Clockwise | Connector_IDC:IDC-Header_2x04_P2.54mm_Vertical_SMD | J5 |
| 1 | Conn_02x10_Odd_Even | Connector_IDC:IDC-Header_2x10_P2.54mm_Vertical | J4 |
| 1 | Guard | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP2 |
| 1 | R | Resistor_SMD:R_0805_2012Metric | R1 |
| 1 | Raspberry_Pi_2_3 | Connector_IDC:IDC-Header_2x20_P2.54mm_Latch6.5mm_Vertical | J1 |
| 1 | Signal | TestPoint:TestPoint_THTPad_D1.5mm_Drill0.7mm | TP1 |
| 1 | TPL9202PWP | Adrian:PWP20_3P4X2P4 | U1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


21 parts, built around the TPL9202PWP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HikariBoy/RelayDemuxBoard repository on GitHub, at the commit this page was made from: the board is RelayBoard.kicad_pcb and its schematic RelayBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask HikariBoy before reusing the design.