4 layers56 × 85 mm
Rock screen
artixzhang/rock-module
Extension PCB boards for Radxa Rock 3C for Audio and Display Screen functions
45 partsGPL-3.0
2 layers70.5 × 115.3 mm
PiPhoneV0
Hiawatha-Engineering/DeepBlueA Pi hat to enable use of a Raspberry Pi as a phone.
- Size
- 70.5 × 115.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 51
- Nets
- 116
- Pads
- 274
- Tracks, vias
- 949, 66
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 1 Jun 2025
- Updated
- 18 Nov 2025
Overview
PiPhoneV0 is an open-source printed circuit board by Hiawatha-Engineering, from the Hiawatha-Engineering/DeepBlue repository on GitHub. It is a 2-layer board of 70.5 × 115.3 mm with 51 parts on 116 nets, routed with 949 tracks and 66 vias.
It is built around the ICN6211, TPS61165DRV and MBR0540. Its parts include 19 diodes, 18 switches, 3 capacitors, 3 connectors and 2 resistors.
Main components
3README
README.mdPhone Model DeepBlue
A Pi hat to enable use of a Raspberry Pi as a phone.
Parts
51| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | D | EasyEDA:SOD-323_L1.8-W1.3-LS2.5-RD | D1, D2, D3, D4, D5, D6, D7, D10, D11, D12, D13, D14, D15, D16, D17, D18 +2 |
| 18 | SW_Push | 1 key-switches.pretty:SW_Gateron_LowProfile_THT | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18 +2 |
| 2 | 1uF | EasyEDA:C0603 | C6, C7 |
| 2 | MountingHole_2.7mm_M2.5 | MountingHole:MountingHole_2.7mm_M2.5 | MH3, MH4 |
| 1 | 220 nF | EasyEDA:C0603 | C5 |
| 1 | 22uH | EasyEDA:IND-SMD_L7.8-W7.0_GCD75 | L1 |
| 1 | 330 | EasyEDA:R1206 | R2 |
| 1 | 5 | EasyEDA:R0603 | R1 |
| 1 | Conn_01x15_MountingPin | EasyEDA:FPC-SMD_15P-P1.00_HDGC_1.0K-GT-15PB | J3 |
| 1 | Conn_01x40_MountingPin | EasyEDA:CONN-SMD_40P-P0.50_HCTL_HC-FPC-05-09-40RLTAG | J2 |
| 1 | GPIO | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J1 |
| 1 | ICN6211 | EasyEDA:QFN-48_L6.0-W6.0-P0.40-TL-EP4.2 | U1 |
| 1 | LOGO | LOGO | Design By Hiawatha Engineering |
| 1 | MBR0540 | EasyEDA:SOD-123_L2.7-W1.6-LS3.7-RD | D20 |
| 1 | TPS61165DRV | EasyEDA:WSON-6_L2.0-W2.0-P0.65-TL-EP | U2 |
Similar boards
- 4 layers52 × 34.8 mm
ICN6211 breakout
tdjastrzebski/ICN6211_breakout
This is a breakout for ICN6211 MIPI DSI Bridge to RGB output.
23 parts16 - 4 layers139.5 × 70 mm
- 2 layers68 × 42 mm
Lcd dsi
Novin3dp/7inch-hdmi-screen
این برد دولایه (۶۸×۴۲ میلیمتر) همان پنل ۷ اینچ AT070TN92 و تاچ GT915 را این بار از پورت DSI رزبریپای راه میاندازد. نسخهی HDMI در پوشهی hardware/ دستنخورده باقی مانده است.
85 parts1 - 4 layers52 × 115.7 mm
- 4 layers
- 4 layers79.4 × 119.4 mm
Pokeboy hw
cameo-5958/pokeboy
Game Boy handheld with its own emulator and a Gen 1 Pokemon battle AI that runs on the device
111 partsMIT - 4 layers50 × 50 mm
Grow light
GeoffreyKassis/led_grow_light
USB-C PD grow light in two assemblies: an FR-4 controller (MAINBOARD/) and a one-layer aluminum LED panel (LEDBOARD/), joined by an 8-wire 2×4 IDC harness.
73 parts
Questions
How big is the PiPhoneV0 PCB?
It measures 70.5 × 115.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the PiPhoneV0 use?
51 parts, built around the ICN6211, TPS61165DRV and MBR0540. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the PiPhoneV0 KiCad files?
From the Hiawatha-Engineering/DeepBlue repository on GitHub, at the commit this page was made from: the board is PiPhoneV0.kicad_pcb and its schematic PiPhoneV0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the PiPhoneV0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hiawatha-Engineering before reusing the design.