

HARDino
Shield Arduino Nano.
- Size
- 95 × 95 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 61
- Nets
- 69
- Pads
- 213
- Tracks, vias
- 683, 34
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Oct 2020
- Updated
- 30 Oct 2020
Overview
HARDino is an open-source printed circuit board by HenryqueFarias16, from the HenryqueFarias16/HARDino repository on GitHub. It is a 2-layer board of 95 × 95 mm with 61 parts on 69 nets, routed with 683 tracks and 34 vias.
It is built around the L293D, SM420561N and BC547, with the RAPC712S among its other parts. Its parts include 24 resistors, 12 connectors, 8 diodes, 4 switches and 3 ICs.
Main components
4L293D
DIP-16-40℃~+150℃ 1.2A 2 4.5V~36V 4mA 600mA DIP-16 Brushed DC Motor Drivers ROHSSTMicroelectronicsStepper Motor DriverSM420561N
插件-20℃~+80℃ 0.56 1 12.6mm 19mm 25mcd 2V 50mW 7 Segment 8mm Common Cathode Red 插件 LED Segment Displays ROHSARKLEDLED Segment DisplaysBC547
TO-92Bipolar (BJT)Jiangsu Changjing Electronics Technology (CJ)RAPC712S
-DC Power ConnectorsSwitchcraft
README
README.mdHARDino
Shield Arduino Nano.
Parts
61| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | 330 | Resistor_SMD:R_1206_3216Metric | R3, R4, R5, R6, R7, R8, R10, R11, R17, R18, R19, R20, R21, R22, R23, R24 +1 |
| 6 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D5, D6, D7 |
| 4 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J4, J11, J12 |
| 3 | 10k | Resistor_SMD:R_1206_3216Metric | R12, R13, R15 |
| 3 | Conn_01x04 | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J2, J5, J10 |
| 2 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C1, C2 |
| 2 | 10k | My Components:Potenciometro | POT1, POT2 |
| 2 | 1k | Resistor_SMD:R_1206_3216Metric | R1, R16 |
| 2 | Conn_01x15 | My Components:PinSocket_1x15_P2.54mm_Vertical | J7, J8 |
| 2 | SW_DIP_x04 | My Components:SW_DIP_SPSTx04_Slide_9.78x12.34mm_W8.61mm_P2.54mm | SW1, SW6 |
| 2 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H5mm | BT1, BT2 |
| 1 | 100 | Resistor_SMD:R_1206_3216Metric | R14 |
| 1 | 1N4007 | Diode_SMD:D_SOD-128 | D8 |
| 1 | 2k | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | BC547 | Package_TO_SOT_THT:TO-92_Inline | Q1 |
| 1 | Buzzer | My Components:Buzzer | BZ1 |
| 1 | Conn_01x03 | My Components:Borne_1x3_10x15mm | J6 |
| 1 | Conn_01x05 | My Components:Borne_1x5_10x25mm | J9 |
| 1 | G5LE-1 | My Components:Relay_5v-250V.10A | K1 |
| 1 | L293D | Package_DIP:DIP-16_W7.62mm | U3 |
| 1 | LDR07 | OptoDevice:R_LDR_5.1x4.3mm_P3.4mm_Vertical | LDR1 |
| 1 | LED_RGBC | LED_THT:LED_D5.0mm-4_RGB | D4 |
| 1 | LOGO | My Components:HardTron | G*** |
| 1 | RAPC712 | My Components:SPC4078 | J1 |
| 1 | SM420561N | Display_7Segment:7SegmentLED_LTS6760_LTS6780 | U2 |
| 1 | SW_DIP_x03 | My Components:SW_DIP_SPSTx03_Slide_9.78x9.8mm_W8.61mm_P2.54mm | SW4 |
| 1 | uA7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U1 |
Similar boards
- 2 layers60 × 90 mm

- 2 layers100.1 × 100.1 mm

- 2 layers88.9 × 73.2 mm

- 2 layers370.8 × 298.5 mm

8 Bit Computer
The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.
323 parts142 - 2 layers98 × 135 mm

- 2 layers258.1 × 122.9 mm

FrontPanel
89Mods/LVDC
Replica of the Launch Vehicle Digital Computer using 74-series logic
124 parts2MIT - 2 layers92 × 68.8 mm

- 2 layers106 × 71.3 mm

Desktop Hardware Monitor
aapaetsch/HardwareMonitorArduino
Code, pcb files and schematics for building a hardware monitor based around the atmega328p
44 parts
Questions
How big is the HARDino PCB?
It measures 95 × 95 mm and has 2 copper layers, 1.6 mm thick.
What parts does the HARDino use?
61 parts, built around the L293D, SM420561N, BC547 and RAPC712S. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the HARDino KiCad files?
From the HenryqueFarias16/HARDino repository on GitHub, at the commit this page was made from: the board is HARDino.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the HARDino design in my own project?
Its repository states no licence, so its author keeps all rights: ask HenryqueFarias16 before reusing the design.