2 layers60 × 45.6 mm
2 layers60 × 45.6 mm
ZED F9P minimal
Hellouin/la_base1- Size
- 60 × 45.6 mm
- Copper layers
- 2
- Thickness
- 1.69 mm
- Parts
- 33
- Nets
- 45
- Pads
- 186
- Tracks, vias
- 205, 414
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 5 Sep 2024
- Updated
- 31 May 2025
Overview
ZED F9P minimal is an open-source printed circuit board by Hellouin, from the Hellouin/la_base repository on GitHub. It is a 2-layer board of 60 × 45.6 mm with 33 parts on 45 nets, routed with 205 tracks and 414 vias.
It is built around the ZED-F9P-04B. Its parts include 7 resistors, 4 capacitors, 4 diodes and 1 inductor.
Main components
1README
Hardware/KICAD/TEST_PCB/README.mdTEST POUR apprendre KICAD sur NEO F9P
Parts
33| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Jumper_2_Open | Connector:CON_1x02 | JP1, JP2, JP3, JP4 |
| 4 | NPTH_test | VIA:NPTH_test | REF, REF, REF, REF |
| 4 | TestPoint | TestPoint:CONN1_5011_KEY | TP2, TP3, TP4, TP5 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C5, C6 |
| 2 | 10k | res_SMD_10kohm:YAG_R0805_YAG | R2, R6 |
| 2 | 3.6 | Diode_SMD:SOD323_DIO | D2, D4 |
| 2 | 330 | res_SMD_330ohm:RC0805N_YAG | R4, R5 |
| 2 | LED_rouge | LED_SMD:LED_0805_2012Metric | D1, D3 |
| 1 | 0.01 µH | Inductor_SMD:IND_786110A_WRE | L1 |
| 1 | 10 Ohm | res_SMD_330ohm:RC0805N_YAG | R1 |
| 1 | 100nf | Capacitor_SMD:C_0805_2012Metric | C2 |
| 1 | 10µF | Capacitor_SMD:C_0805_2012Metric | C4 |
| 1 | 3.9k | res_SMD_4.3kohm:RC0805N_YAG | R3 |
| 1 | 5.6k | res_SMD_5.6kohm:RC0805N_YAG | R7 |
| 1 | DF11-18DS-2DSA06 | Connector:CON18_2X9_U_DF11_HIR | INPUTS1 |
| 1 | EMPCB.SMAFSTJ.B.HT | Connector:TAOGLAS_EMPCB.SMAFSTJ.B.HT | SMA1 |
| 1 | ZED-F9P | RF_GPS:ublox_ZED | ZED-F9P1 |
| 1 | ~ | 00_OPA2365:D8 | OPA2365AID1 |
| 1 | ~ | LM1086:NDE0003B | LM1086IT-ADJ_NOPB1 |
More from Hellouin/la_base
1Similar boards
- 4 layers60 × 60 mm
CLAS Combo Breakout
takuhoTech/CelestNavi-Combo
Ready-to-use GNSS+CLAS receiver with integrated loop antenna
87 parts9MIT - 2 layers61 × 59 mm
Feather ZED F9P GPS Rev1
averywallis/Feather-ZED-F9P-GPS
KiCad files for a ZED-F9P GPS Featherwing
69 parts7GPL-3.0 - 4 layers90 × 50 mm
Ublox ZED F9P (Full feature)
jirayu3141/F9P_moving_base_pcb
2 ZED F9P as moving base and rovers
93 parts1 - 6 layers35 × 40 mm
Rtk mini
Poppy-Robotics/rtk
CAN enabled, RTK GNSS module for robotics based on u-blox ZED-X20P
75 parts - 4 layers52 × 57.8 mm
ZED F9P
Will946/GNSS
u-blox ZED-F9P RTK GNSS breakout board with dual-band L1/L2 reception and centimeter-level positioning accuracy.
65 partsMIT - 4 layers43.2 × 43.2 mm
Qwiic GPS RTK SMA - ublox ZED F9P
Zmotive/HY_550CJ_Control_board
This Project is still under development and not all features have been tested. As I work through the hardware I will continue to update.
143 parts - 2 layers65 × 30 mm
Rgb to hdmi
hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI
33 parts1kGPL-3.0 - 2 layers127 × 96 mm
Amiga gfxcard
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
33 parts1k
Questions
How big is the ZED F9P minimal PCB?
It measures 60 × 45.6 mm and has 2 copper layers, 1.69 mm thick.
What parts does the ZED F9P minimal use?
33 parts, built around the ZED-F9P-04B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ZED F9P minimal KiCad files?
From the Hellouin/la_base repository on GitHub, at the commit this page was made from: the board is Hardware/KICAD/ZED_F9P_minimal_design/ZED_F9P_minimal/ZED_F9P_minimal.kicad_pcb and its schematic Hardware/KICAD/TEST_PCB/TEST_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ZED F9P minimal design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hellouin before reusing the design.