

Arduino Extension Board
- Size
- 170.5 × 158.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 73
- Nets
- 72
- Pads
- 293
- Tracks, vias
- 729, 45
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 31 Mar 2026
- Updated
- 31 Mar 2026
Overview
Arduino Extension Board is an open-source printed circuit board by Hegde-Bhargav, from the Hegde-Bhargav/KICAD repository on GitHub. It is a 2-layer board of 170.5 × 158.3 mm with 73 parts on 72 nets, routed with 729 tracks and 45 vias.
It is built around the ARDUINO UNO R3 and ACPL-214-500E. Its parts include 28 connectors, 18 switches, 11 resistors, 9 diodes and 3 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
2ARDUINO UNO R3
Arduino UNO R3 Printed Circuit Board ModuleArduinoUncategorisedACPL-214-500E
SOIC-4-55℃~+110℃ 1 1.2V 20% 200mW 2us 3.75kV 3us 400% 400mV@8mA,2.4mA 50mA 50mA 80V AC,DC Phototransistor SOIC-4 Transistor, Photovoltaic Output Optoisolators ROHSBroadcom LimitedTransistor, Photovoltaic Output Optoisolators
Parts
73| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | SW_Push | Button_Switch_THT:SW_PUSH_6mm_H4.3mm | SW1, SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16 |
| 8 | LED | LED_THT:LED_D5.0mm | D1, D2, D3, D4, D5, D6, D7, D8 |
| 7 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R2, R3, R4, R5, R6, R7 |
| 4 | Conn_01x03_Pin | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J7, J11, J27, J28 |
| 4 | Conn_01x04_Pin | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J5, J18, J21, J22 |
| 3 | Conn_01x01_Pin | Connector_PinHeader_2.54mm:PinHeader_1x01_P2.54mm_Vertical | J12, J13, J14 |
| 2 | C | Capacitor_THT:C_Disc_D8.0mm_W5.0mm_P7.50mm | C1, C2 |
| 2 | Conn_01x04_Socket | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J19, J20 |
| 2 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2, J24 |
| 2 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3, J16 |
| 2 | Conn_01x14_Pin | Connector_PinHeader_2.54mm:PinHeader_1x14_P2.54mm_Vertical | J8, J10 |
| 2 | R | Resistor_SMD:R_0603_1608Metric | R9, R10 |
| 1 | 150 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8 |
| 1 | 1N4007 | Diode_SMD:D_MiniMELF | D9 |
| 1 | 2N3905 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | Q1 |
| 1 | ACPL-214-500E | Package_SO:SOP-4_4.4x2.6mm_P1.27mm | U3 |
| 1 | Arduino_UNO_R3 | Module:Arduino_UNO_R3 | A1 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_Horizontal | J1 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J15 |
| 1 | Conn_01x03_Pin | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Horizontal | J6 |
| 1 | Conn_01x05_Socket | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J25 |
| 1 | Conn_01x07_Pin | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J23 |
| 1 | Conn_01x07_Socket | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J26 |
| 1 | Conn_01x08_Pin | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | J4 |
| 1 | G5LE-1 | Relay_THT:Relay_SPDT_Omron-G5LE-1 | K1 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |
| 1 | LM7812_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U2 |
| 1 | R | Resistor_THT:R_Axial_DIN0309_L9.0mm_D3.2mm_P15.24mm_Horizontal | R11 |
| 1 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW17 |
| 1 | Screw_Terminal_01x03 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-3_1x03_P5.00mm_Horizontal | J17 |
| 1 | ~ | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J9 |
More from Hegde-Bhargav/KICAD
2- 2 layers245.8 × 153.3 mm

- 2 layers148.5 × 69.8 mm

Similar boards
- 4 layers40 × 100 mm

BR Motor
axpaul/Avionic-Mastodonte
Mastodonte experimental rocket avionic (On-board electronics) created by Paul Miailhe, Version 2025
118 parts6CERN-OHL-S-2.0 - 4 layers25 × 37.3 mm

LinKey
Konkzor/LinKey
Une clé WIFI lisant la sortie TIC du Linky connectée au broker MQTT d'un Home Assistant
42 parts1CERN-OHL-W-2.0 - 2 layers33 × 84.9 mm

- 4 layers42.2 × 101.8 mm

Datalogger PCB
uwp-sammckee/DataLogger
PACKET BREAKDOWN: 0-roll\ 1-pitch\ 2-yaw\ 3-alitude\ 4-pressure\ 5-temperature\ 6-accX\ 7-accY\ 8-accZ\ 9-gyroX\ 10-gyroY\ 11-gyroZ\ 12-time\ 13-placeholder\ 14-placeholder\ 15-placeholder
54 parts1 - 4 layers100 × 100 mm

- 2 layers64.5 × 56.2 mm

- 2 layers74 × 40 mm

- 2 layers68.8 × 53.6 mm

Relatively Universal ROM Programmer
AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
149 parts257GPL-3.0
Questions
How big is the Arduino Extension Board PCB?
It measures 170.5 × 158.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Arduino Extension Board use?
73 parts, built around the ARDUINO UNO R3 and ACPL-214-500E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Arduino Extension Board KiCad files?
From the Hegde-Bhargav/KICAD repository on GitHub, at the commit this page was made from: the board is Arduino_Extension_Board/Arduino_Extension_Board.kicad_pcb and its schematic 4layer/test4/test4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Arduino Extension Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask Hegde-Bhargav before reusing the design.