Skip to the content
2 layers50 × 20 mmFan me, the printed circuit board in 3D
Size
50 × 20 mm
Copper layers
2
Thickness
1.6 mm
Parts
14
Nets
7
Pads
34
Tracks, vias
45, 13
Pours
1
Routed
Yes
KiCad
KiCad 4
Created
24 Apr 2018
Updated
16 May 2018

Overview

Fan me is an open-source printed circuit board by HarkonenBade, from the HarkonenBade/fan-me repository on GitHub. It is a 2-layer board of 50 × 20 mm with 14 parts on 7 nets, routed with 45 tracks and 13 vias.

Its parts include 3 resistors, 3 connectors, 2 capacitors, 2 crystals and 1 IC.

Parts

14
QtyValueFootprintReferences
2 Mounting_Holes:MountingHole_2.7mm_M2.5X1, X2
1 fan-me:A1xxxxCxxxSW1
11kagg:0603R1
11uagg:0603C1
1200kagg:0603R4
1220kPotentiometers:Potentiometer_Trimmer_Piher_PT-10v10_Horizontal_Px10.0mm_Py5.0mmRV1
12u2agg:0603C2
130kagg:0603R3
1BARREL_JACKConnect:BARREL_JACKCON1
1FAN1fan-me:Molex_KK-6410-03_03x2.54mm_AngleJ1
1FAN2fan-me:Molex_KK-6410-03_03x2.54mm_AngleJ2
1LDFPT-TRfan-me:PPAKU1
1PWRagg:0805-LEDD1

Similar boards

  • 2 layers116.8 × 30 mmType d, the printed circuit board in 3D

    Type d

    google/mozc-devices

    Circuit diagrams and firmware source code for Gboard DIY keyboards

    14 parts3kApache-2.0
  • 2 layers32 × 22 mmDiff driver, the printed circuit board in 3D

    Diff driver

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    14 parts990GPL-3.0
  • 2 layers34 × 45 mm2032Charger, the printed circuit board in 3D

    2032Charger

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    14 parts915
  • 2 layers34 × 109.9 mmTdisplay s3, the printed circuit board in 3D

    Tdisplay s3

    landonr/homeThing

    Wifi Smart Home Remotes that run on ESPHome

    14 parts551GPL-3.0
  • 2 layers45.3 × 42.7 mmMainPcb, the printed circuit board in 3D

    MainPcb

    adamb314/ServoProject

    Getting the most out of your hobby servo

    14 parts545
  • 2 layers42.5 × 28.8 mmC5VRX JACK DIY, the printed circuit board in 3D

    C5VRX JACK DIY

    Twotoz/C5VRX

    Ultra-minimal, zero-CPU 5.8 GHz analog FPV video receiver using ESP32-C5 Wi-Fi 6 PHY MODEM_DIAG, BitScrambler WBFM demodulation & resistor DAC CVBS

    14 parts515GPL-3.0
  • 2 layers62 × 24 mmMai button, the printed circuit board in 3D

    Mai button

    whowechina/mai_pico

    Pico controller for Maimai

    14 parts475

Questions

How big is the Fan me PCB?

It measures 50 × 20 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Fan me use?

14 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Fan me KiCad files?

From the HarkonenBade/fan-me repository on GitHub, at the commit this page was made from: the board is fan-me.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Fan me design in my own project?

Its repository states no licence, so its author keeps all rights: ask HarkonenBade before reusing the design.