2 layers
2 layers
Remote 1
HamedMasafi/MeloCar- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 27
- Pads
- 72
- Tracks, vias
- 148, 0
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 28 Jan 2023
- Updated
- 17 Nov 2024
Overview
Remote 1 is an open-source printed circuit board by HamedMasafi, from the HamedMasafi/MeloCar repository on GitHub. It is a 2-layer board with 21 parts on 27 nets, routed with 148 tracks and 0 vias.
Its parts include 3 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | , , , , , , , , , , , , , | ||
| 1 | ARDUINO_PRO_MINI | Arduino pro mini:MODULE_ARDUINO_PRO_MINI | U1 |
| 1 | Joystick_Left | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J2 |
| 1 | Joystick_Right | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J3 |
| 1 | Micro-Power-IN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | NRF24L01_Breakout | Arduino pro mini:NRF24L01 | U2 |
| 1 | POWERS | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | |
| 1 | PushButton_6_pin | Connector_PinHeader_2.54mm:PushButton_6_pin | BTN |
More from HamedMasafi/MeloCar
11- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
- 2 layers
Similar boards
- 2 layers28.3 × 39.8 mm
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software
21 parts5.1kGPL-3.0 - 2 layers171.2 × 72.9 mm
Amiga gfxcard before pour
mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog
21 parts1k - 2 layers93.9 × 46 mm
- 2 layers45.5 × 42.9 mm
Esphome han reader
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
21 parts915 - 2 layers31.8 × 14.5 mm
Esp prog
drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad
21 parts744MIT - 2 layers23.5 × 15.8 mm
QuiverAttachPCB
Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.
21 parts617CERN-OHL-S-2.0 - 2 layers69.9 × 41.3 mm
- 2 layers161.3 × 111.8 mm
Questions
What parts does the Remote 1 use?
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Remote 1 KiCad files?
From the HamedMasafi/MeloCar repository on GitHub, at the commit this page was made from: the board is schematic/remote/remote_1.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Remote 1 design in my own project?
Its repository states no licence, so its author keeps all rights: ask HamedMasafi before reusing the design.