
4ch relay-1fan arduino nano pcb
ashloverscn/4ch-relay-1fan-arduino-nano-pcb
4ch-relay-1fan-arduino-nano-pcb

PCB design for the MrJ-LayoutFX Arduino Nano accessory decoder board
Nano signals is an open-source printed circuit board by HO44-PROJECT, from the HO44-PROJECT/MrJ-LayoutFX-Nano-PCB repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 56.1 × 67.7 mm with 49 parts on 60 nets, routed with 165 tracks and 0 vias.
It is built around the L7805 and DB107. Its parts include 25 resistors, 6 capacitors, 5 diodes, 5 connectors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 19 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R4, R5, R6, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R21, R22, R23 +3 |
| 3 | 10k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R2, R3, R20 |
| 2 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2, C6 |
| 2 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J1, J3 |
| 1 | 100nF | Capacitor_THT:C_Disc_D4.3mm_W1.9mm_P5.00mm | C3 |
| 1 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1 |
| 1 | 1N5817 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D5 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R25 |
| 1 | 1k1 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 220pF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C4 |
| 1 | 2k | Resistor_THT:R_Axial_DIN0204_L3.6mm_D1.6mm_P7.62mm_Horizontal | R24 |
| 1 | 470µF | Capacitor_THT:CP_Radial_D8.0mm_P3.50mm | C1 |
| 1 | 47µF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C5 |
| 1 | 6N137 | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | D11 D10 D9 D8 D7 D6 D5 D4 D3 D1 D0 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x11_P3.50mm_Horizontal | J5 |
| 1 | D12 D13 A0 A1 A2 A3 A4 A5 A6 A7 | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x10_P3.50mm_Horizontal | J6 |
| 1 | DB107 | Diode_THT:Diode_Bridge_DIP-4_W7.62mm_P5.08mm | D2 |
| 1 | DC | LED_THT:LED_D3.0mm | D4 |
| 1 | DCC | LED_THT:LED_D3.0mm | D3 |
| 1 | DCC | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | J2 |
| 1 | GND 5V | TerminalBlock_4Ucon:TerminalBlock_4Ucon_1x02_P3.50mm_Horizontal | DCIN1 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U2 |
| 1 | Prgm A7 | Button_Switch_THT:SW_PUSH_6mm_H5mm | SW1 |
The 46 most common of 49 parts.

ashloverscn/4ch-relay-1fan-arduino-nano-pcb
4ch-relay-1fan-arduino-nano-pcb


ashloverscn/4ch-spdt-relay-1fan-arduino-nano-pcb
4ch-spdt-relay-1fan-arduino-nano-pcb



gjagadish1/Design-and-fabrication-of-low-power-5V-SMPS
Design and fabrication of a low-power 5V SMPS using KiCad involves schematic design, PCB layout, and testing. The SMPS provides efficient, regulated 5V output for low-power electronic applications.

walterwhiteita/esp8266-mqtt-gate-controller
Welcome to the ESPGate repository! This project offers a comprehensive retrofit solution tailored to upgrade a variety of gate control boards.

thorpej/Electronics
thorpej's electronics projects repository. Tube audio, other tube stuff, and stuff with computers in it.
It measures 56.1 × 67.7 mm and has 2 copper layers, 1.6 mm thick.
49 parts, built around the L7805 and DB107. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the HO44-PROJECT/MrJ-LayoutFX-Nano-PCB repository on GitHub, at the commit this page was made from: the board is design/nano_signals.kicad_pcb and its schematic design/nano_signals.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).