
TeensyMaestro Main PCB
rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro

Telefon s RPI
Old phone rpi3 rev a spaghetti is an open-source printed circuit board by H0nz4k, from the H0nz4k/OldPhone repository on GitHub. It is a 2-layer board of 140 × 80 mm with 20 parts on 43 nets, routed with 123 tracks and 32 vias.
It is built around the MCP23017-E/SP. Its parts include 8 connectors, 5 resistors, 4 capacitors, 1 IC and 1 diode.
Prvni navrh PCB pro Raspberry Pi 3B verzi projektu.
Autoritativni pinout:
../../RPI_B3/README.md../../ZAPOJENI.md../../PCB_NAVRH.mdold_phone_rpi3.kicad_pcb je vycistena placement verze s GND zónouold_phone_rpi3_rev_a_spaghetti.kicad_pcbDispleje jsou zatim vyvedene jako signalove headery, ne jako presny mechanicky footprint HDSP/QDSP modulu. Pred vyrobou PCB je potreba potvrdit presny typ displeje, roztec pinu a mechaniku v telefonu.
LED1 je v navrhu premapovana na BCM17, protoze BCM21 je v RPI_B3 zapojeni CE2 displeje.
Software scripts/led.py se proto musi pred pouzitim LED upravit.
Rev A zatim nebyla overena pres KiCad DRC/ERC. Pred vyrobou je potreba otevrit projekt v KiCadu, doplnit presne footprinty displeju, zkontrolovat routovani a teprve potom generovat Gerbery.
Poznamka: ten prvni pokus o routovani byl textove vygenerovany mimo KiCad a slouzil jen jako kontrola konektivity. Vypadal neprehledne, proto je oddeleny do zalohy.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 330R | Local:R_Axial_7.62 | R1, R2, R3, R4, R5 |
| 1 | 1000u/6.3V bulk | Local:CP_Radial_5mm | C4 |
| 1 | 100n DISP1 | Local:C_Disc_5.08 | C2 |
| 1 | 100n DISP2 | Local:C_Disc_5.08 | C3 |
| 1 | 100n MCP | Local:C_Disc_5.08 | C1 |
| 1 | 1N4148/1N4007 flyback | Local:D_Axial | D1 |
| 1 | 2N7000/AO3400 drv placeholder | Local:TO92_NMOS | Q1 |
| 1 | BELL_DRV | Local:Conn_1x04 | J7 |
| 1 | DIAL | Local:Conn_1x03 | J4 |
| 1 | DISPLAY1_SIGNALS | Local:Display_Breakout_1x22 | J2 |
| 1 | DISPLAY2_SIGNALS | Local:Display_Breakout_1x22 | J3 |
| 1 | HOOK_BTN | Local:Conn_1x03 | J5 |
| 1 | LEDS | Local:Conn_1x06 | J6 |
| 1 | MCP23017-E/SP | Local:DIP-28_W7.62mm | U1 |
| 1 | POWER_IN | Local:Conn_1x03 | J8 |
| 1 | Raspberry Pi 3B GPIO | Local:RPi_2x20_Header | J1 |

rimuadmin/TeensyMaestro-Hardware
Hardware for the TeensyMaestro


Alli-Ekundayo/scpt-rl
SCPT-RL trains a cross-attention transformer policy to place PCB components sequentially on a discrete grid. Training has two phases:

arthurkowskii/AKOR_01
having fun building a synth ! C++ programming, PCB design with KiCad, and hands-on hardware work in what some people call “the real world.”

Kalilinuxloverr/Desk-Mate
Wall-E-artiger Schreibtisch-Begleiter: Ampel fuer Claude Code & Downloads, Motorfader, Augen-Displays. ESP32-S3, Swift, KiCad, 3D-Druck.



It measures 140 × 80 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the MCP23017-E/SP. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the H0nz4k/OldPhone repository on GitHub, at the commit this page was made from: the board is kicad/old_phone_rpi3/old_phone_rpi3_rev_a_spaghetti.kicad_pcb and its schematic kicad/gsm_rozsireni/gsm_rozsireni.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask H0nz4k before reusing the design.