
Display eval
byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

A basic PCB with three sizes of QFN MCU for practicing fine soldering
QFN practice is an open-source printed circuit board by H-S-S-11, from the H-S-S-11/QFN-practice repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 17.8 × 27.9 mm with 12 parts on 29 nets, routed with 215 tracks and 42 vias.
Its parts include 6 connectors, 3 capacitors and 1 IC. It belongs with the STM32 boards of this library.
A basic PCB with three sizes of QFN MCU for practicing fine soldering
| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 100n | SamacSys_Parts:RC-1206-0805-hybrid | C1, C2, C3 |
| 2 | Conn_01x03 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3, J7 |
| 2 | Conn_01x10 | Connector_PinHeader_2.54mm:PinHeader_1x10_P2.54mm_Vertical | J1, J2 |
| 2 | Jumper_NC_Small | SamacSys_Parts:0202-solder-jumper | JP2, JP5 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J5 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_2x02_P2.54mm_Vertical | J4 |
| 1 | STM32F031G4Ux-thermal-pad | SamacSys_Parts:QFN28-4x4mm-0_5mmP-thermalpad | U2 |

byrantech/laptop
anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.





buganini/Kikakuka
Kikakuka — KiCad Workspace, Panelization, Build Variants, Differ & FreeCAD PCB Bending and Assembly

BelaPlatform/Trill
Trill sensors are designed to bring beautiful touch interaction to digital projects. Trill sensors are available now on the Bela Shop and via Mouser Electronics.

marsairforce/breakout_boards
Small circuit boards to assist with breadboard prototyping with SMD packages.
It measures 17.8 × 27.9 mm and has 4 copper layers, 1.6 mm thick.
12 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the H-S-S-11/QFN-practice repository on GitHub, at the commit this page was made from: the board is qfn-practice/qfn-practice.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).