
V1boardOLDOVERSIZED
GuySandler/Logic-Gate-Display-PCB
My first PCB made for solder by hack club

My first PCB made for solder by hack club
LogicGateDisplaySolder is an open-source printed circuit board by GuySandler, from the GuySandler/Logic-Gate-Display-PCB repository on GitHub. It is a 2-layer board of 100 × 100 mm with 36 parts on 28 nets, routed with 124 tracks and 0 vias.
Its parts include 16 resistors, 6 transistors, 6 switches and 3 diodes.
My first PCB showing 3 logic gates.
Made for Solder by Hackclub

| Qty | Value | Footprint | References |
|---|---|---|---|
| 16 | R | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2, R3, R4, R5, R6, R7, R8, R9, R10, R11, R12, R13, R14, R15, R16, R17 |
| 6 | NPN | Package_TO_SOT_THT:TO-92L_HandSolder | Q3, Q4, Q5, Q6, Q7, Q8 |
| 6 | SW_Push | Button_Switch_THT:SW_PUSH_6mm | SW1, SW2, SW3, SW4, SW5, SW6 |
| 3 | LED | LED_THT:LED_D5.0mm | D3, D4, D5 |
| 3 | LOGO | LOGO | G***, G***, G*** |
| 1 | Battery_Cell | Battery:BatteryHolder_Keystone_3034_1x20mm | BT1 |
| 1 | R_Potentiometer | Potentiometer_THT:Potentiometer_Vishay_T73YP_Vertical | RV1 |

GuySandler/Logic-Gate-Display-PCB
My first PCB made for solder by hack club

hoglet67/RGBtoHDMI
Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!


tardate/LittleArduinoProjects
a collection of "Little Electronic & Arduino Projects", most involving electronics or an Arduino in one way or another!


Neumi/open_echo
Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.


It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
36 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GuySandler/Logic-Gate-Display-PCB repository on GitHub, at the commit this page was made from: the board is LogicGateDisplaySolder.kicad_pcb and its schematic LogicGateDisplaySolder.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GuySandler before reusing the design.