
Cube motherboard
willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

I made this project as a continuation for the hackpad, and I really wanted to know how building a real keyboard is, not just a macropad. This helped me finally understand how keyboards really work!
Keyboard is an open-source printed circuit board by GuySabban, from the GuySabban/custom-keyboard repository on GitHub. It is a 2-layer board of 335.4 × 118.1 mm with 169 parts on 123 nets, routed with 1,020 tracks and 187 vias.
It is built around the ESP32-S3-DEVKITC-1-N8. Its parts include 84 switches, 83 diodes, 1 IC and 1 connector. It belongs with the keyboards and input boards and the ESP32 boards of this library.
This is my fully custom keyboard, fitted with a 75% layout, 2 macro keys, a knob and an oled screen!
I made this project as a continuation for the hackpad, and I really wanted to know how building a real keyboard is, not just a macropad. This helped me finally understand how keyboards really work!
| Qty | Value | Footprint | References |
|---|---|---|---|
| 83 | Diode | ScottoKeebs_Components:Diode_DO-35 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +67 |
| 72 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_1.00u | S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +56 |
| 3 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_1.25u | S72, S73, S74 |
| 3 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_2.00u | S27, S58, S69 |
| 2 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_1.50u | S29, S42 |
| 1 | ESP32-S3-DevKitC | PCM_Espressif:ESP32-S3-DevKitC | U1 |
| 1 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_2.25u | S56 |
| 1 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_1.75u | S44 |
| 1 | Keyswitch | ScottoKeebs_Hotswap:Hotswap_MX_6.25u | S75 |
| 1 | OLED_128x32 | ScottoKeebs_Components:OLED_128x32 | J1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW1 |

willem-pennings/balancing-cube
A cube that balances itself in a corner or edge using reaction wheels

jazzmonger/Traeger-PID-Controller
Traeger Smoker/Grill Controller based on an

ohasanov-hbrw/tribit32-advanced
A tri-microcontroller, overengineered GameBoy Advance clone. More value was given to the controls and the exterior look, which is cool!



FIPATECH/CDFR26_PAMI
Open source firmware and PCB for a differential mobile robot (PAMI) based on ESP32-S3 - Coupe de France de Robotique

dnhutchins/ETC_Express_Reverse_Eng
The ultimate goal of this work is to develop an interface to use the control surface from a legacy ETC Express 24/48 lighting controller as a modern EOSNomad compatible programming and fader wing.

heckler/esphome-device-configs
Configuration definitions for local ESPHome files
It measures 335.4 × 118.1 mm and has 2 copper layers, 1.6 mm thick.
169 parts, built around the ESP32-S3-DEVKITC-1-N8. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GuySabban/custom-keyboard repository on GitHub, at the commit this page was made from: the board is PCB/keyboard.kicad_pcb and its schematic PCB/keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GuySabban before reusing the design.