
75he
Fefe-Nayz/kbhe-monorepo
TIPE 2026 - 75% Hall effect keyboard ISO layout - Monorepo: Firmware, PCB, 3D Models, PC Software

A super cool DIY custom macropad with OLED display!
Macropad is an open-source printed circuit board by Gutsplatt, from the Gutsplatt/Gutsplatt-Super-Selector repository on GitHub. It is a 2-layer board of 80 × 45 mm with 11 parts on 16 nets, routed with 78 tracks and 3 vias.
It is built around the EC11E15244B2 and SK6812MINI-E. Its parts include 5 switches, 2 ICs and 2 diodes. It belongs with the keyboards and input and lEDs and displays boards and the RP2040 boards of this library.
A super cool DIY custom macropad with OLED display!
| Schematic | PCB |
|---|---|
| Front PCB | Back PCB |
|---|---|
Final Product: I used Fusion360. Uses 5 M3 botls and heatset inserts to secure everything in place. I learned a lot with this project and was very fun!
4 corner screws go in through the bottom and screw into heatset inserts in the top lid, 1 smaller screw through the PCB. Fairly Simple
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | SW_Push | Button_Switch_Keyboard:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW3, SW4, SW5 |
| 2 | SK6812MINI | LED_SMD:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | D1, D2 |
| 1 | EC11E15244B2 | EC11 Rotary Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | U2 |
| 1 | OLED | 0.91 OLED:SSD1306-0.91-OLED-4pin-128x32 | OL1 |
| 1 | XIAO-RP2040-DIP | OPL:XIAO-RP2040-DIP | U1 |
The 10 most common of 11 parts.

Fefe-Nayz/kbhe-monorepo
TIPE 2026 - 75% Hall effect keyboard ISO layout - Monorepo: Firmware, PCB, 3D Models, PC Software

DCentralTech/HashHacker-Multi-Hashboard-Tester
HashHacker Multi-Hashboard Tester from D-Central, the ultimate open-source tool for repairing and testing your ASIC miners.



PaulBichl/VibePCB-bench-psu
USB-C PD (20 V) powered bench supply, 2 independent channels, 1.6-16.6 V / 3 A each, constant voltage / constant current, designed with VibePCB.

GodOfStrategy/Custom-PSU
This project is my attempt at designing a fully programmable bench power supply from the ground up.

gustavorubim/field13-macropad
FIELD 13: DIY programmable macropad with joystick, rotary encoder, editable CAD, electronics, firmware, and visual build documentation.

It measures 80 × 45 mm and has 2 copper layers, 1.6 mm thick.
11 parts, built around the EC11E15244B2 and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Gutsplatt/Gutsplatt-Super-Selector repository on GitHub, at the commit this page was made from: the board is PCB/Macropad.kicad_pcb and its schematic PCB/Macropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Gutsplatt before reusing the design.