4 layers37 × 18 mm
2 layers43.2 × 18.5 mm
REV0.0.2 RZLLCW GS JADE NANO+
GroundStudio/GroundStudio_Jade_NanoPlus2GroundStudio Jade Nano+
- Size
- 43.2 × 18.5 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 54
- Nets
- 58
- Pads
- 193
- Tracks, vias
- 785, 156
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 4 Aug 2022
- Updated
- 15 Mar 2023
Overview
REV0.0.2 RZLLCW GS JADE NANO+ is an open-source printed circuit board by GroundStudio, from the GroundStudio/GroundStudio_Jade_NanoPlus repository on GitHub. It is a 2-layer board of 43.2 × 18.5 mm with 54 parts on 58 nets, routed with 785 tracks and 156 vias.
It is built around the TS342A2P-WZ. Its parts include 13 capacitors, 10 resistors, 6 connectors, 5 diodes and 3 ICs.
Main components
1README
README.mdGroundStudio Jade Nano+
Get it from ardushop.ro
Explore all the GroundStudio products at GroundStudio.ro
Description
ATMEGA328PB based development board featuring picoPower® technology for better power management, Peripheral Touch Controller (PTC), 32kBytes of In-System Self-Programmable Flash program memory, 1kBytes EEPROM, 2kBytes Internal SRAM, 9 PWM Channels, 22 Digital Pins, 2 USART, 2 SPI, I²C and 8 channel 10 bit ADC Pins and HT42B534-2 for USB comunication.
Contents
- /Documentation -- Pinout.
- /Hardware -- Schematics, layout.
Versions
(Not all tags shown)
- [REV0.0.2]:
- removed R11 and R12
License
This is released under the Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. You are welcome to use this for commercial purposes.
Please consider contributing back to this project or others to help the open-source hardware community continue to thrive and grow!
Parts
54| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | C_0402_100nF_16V | GS_Local:C_0402_alt | C2, C3, C4, C7, C9, C11 |
| 4 | TestPoint | GS_Local:TestPoint | TP_DTR2, TP_LL1, TP_USH1, TP_VBUS1 |
| 3 | C_0402_4.7uF_16V | GS_Local:C_0402_alt | C6, C8, C10 |
| 3 | R_0402_20k | GS_Local:R_0402_alt | R3, R6, R7 |
| 2 | C_0402_47pF_50V | GS_Local:C_0402_alt | C12, C13 |
| 2 | Fiducial | GS_Local:Fiducial_0.75mm_Mask1.5mm | FID1, FID2 |
| 2 | LED_0402_RED | GS_Local:LED_0402_alt | D1, LED_POW1 |
| 2 | PinHeader_1x15_P2.54_V_M B-2100S15P-A110 | GS_Local:PinHeader_1x15_P2.54mm_Vertical_Male | J1, J2 |
| 2 | R_0402_1k | GS_Local:R_0402_alt | R1, R2 |
| 2 | R_0402_33 | GS_Local:R_0402_alt | R5, R8 |
| 2 | R_0402_5.1k | GS_Local:R_0402_alt | R9, R10 |
| 2 | SOD-123 B0520LW | GS_Local:SOD-123 | D2, D4 |
| 1 | C_0402_1uF_10V | GS_Local:C_0402_alt | C1 |
| 1 | C_0603_1uF_50V | GS_Local:C_0603 | C5 |
| 1 | L LED DISABLE | GS_Local:SolderJumper_NC_small | J4 |
| 1 | LED_0402_GREEN | GS_Local:LED_0402_alt | D3 |
| 1 | LOGO | GS_Branding:GS_Logo2_4x4 | G*** |
| 1 | LOGO | GS_Branding:GS_Logo2_3x3 | G*** |
| 1 | LOGO | GS_Branding:GS_.ro_1.2x0.6 | G*** |
| 1 | LOGO | GS_Branding:GS_GroundStudio_14.6x1.8 | G*** |
| 1 | LOGO | GS_Branding:GS_Made in Romania_13.8x1.4 | G*** |
| 1 | LOGO | GS_Branding:GS_JadeNano+_9.0x1.4 | G*** |
| 1 | LOGO | GS_Branding:GS_JadeNano+_16.4x2.5 | G*** |
| 1 | PWR LED DISABLE | GS_Local:SolderJumper_NC_small | J6 |
| 1 | PinHeader_2x03_P2.54_V_M 210-72-03GB01 | GS_Local:PinHeader_2x03_P2.54mm_Vertical_Male | J3 |
| 1 | QFN-32-1EP_5x5_P0.5_328PB-MN | GS_Local:QFN-32-1EP_5x5mm_P0.5mm_EP3.1x3.1mm | U1 |
| 1 | RTX LED DISABLE | GS_Local:SolderJumper_NC_small | J5 |
| 1 | R_0402_10k | GS_Local:R_0402_alt | R4 |
| 1 | Resonator_3Pin_3.2x1.3 CSTNE16M0V | GS_Local:CSTNE | Y1 |
| 1 | SOP-16_150MIL HT42B534-2 | GS_Local:SOP-16_150MIL | IC1 |
| 1 | SOT-23-3 SSP7603P50MR | GS_Local:SOT-23-3 | U3 |
| 1 | TS342A2P-WZ | GS_Local:TS342A2P-WZ | SW1 |
| 1 | TestPoint RxTx | GS_Local:TestPoint | TP1 |
| 1 | USB_C 918-418K2023S40001 | GS_Local:USB_C_C167321 | USB1 |
Similar boards
- 4 layers39.5 × 18 mm
- 4 layers37 × 18 mm
- 2 layers17.8 × 20.6 mm
- 2 layers53.3 × 17.8 mm
REV0.01 SOJOWS GS MAGMA SPLASH
GroundStudio/GroundStudio_Magma_Splash
GroundStudio Magma Splash
54 parts5 - 4 layers72 × 43.4 mm
Babelfish
vvuk/babelfish
Babelfish is a hardware device and associated software to allow using a USB keyboard and mouse on a variety of retro computers.
101 parts2MIT - 2 layers53.3 × 17.8 mm
REV0.4 HBPLQA GS Magma Droplet
GroundStudio/GroundStudio_Magma_Droplet
Explore all the GroundStudio products at GroundStudio.ro
43 parts1 - 2 layers81.6 × 117.5 mm
Creative Pad
Cherrytree56567/Creative-Pad
A simple Macropad which has hotswap switches with custom key binds.
69 partsMIT
Questions
How big is the REV0.0.2 RZLLCW GS JADE NANO+ PCB?
It measures 43.2 × 18.5 mm and has 2 copper layers, 1.6 mm thick.
What parts does the REV0.0.2 RZLLCW GS JADE NANO+ use?
54 parts, built around the TS342A2P-WZ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the REV0.0.2 RZLLCW GS JADE NANO+ KiCad files?
From the GroundStudio/GroundStudio_Jade_NanoPlus repository on GitHub, at the commit this page was made from: the board is Hardware/REV0.0.2 - Kicad6/REV0.0.2 RZLLCW_GS JADE NANO+.kicad_pcb and its schematic Hardware/REV0.0.2 - Kicad6/REV0.0.2 RZLLCW_GS JADE NANO+.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the REV0.0.2 RZLLCW GS JADE NANO+ design in my own project?
Its repository states no licence, so its author keeps all rights: ask GroundStudio before reusing the design.