2 layers25.3 × 17.8 mm
REV1.0.0 JACWFH GS BMP280-module U
GroundStudio/BMP280_module
Explore all the GroundStudio products at GroundStudio.ro
60 parts
2 layers22.9 × 20.3 mm
REV0.0.1 RNQMCD GS AHT21
GroundStudio/GroundStudio_AHT21_moduleExplore all the GroundStudio products at GroundStudio.ro
- Size
- 22.9 × 20.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 21
- Nets
- 9
- Pads
- 42
- Tracks, vias
- 113, 21
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Oct 2023
- Updated
- 11 Mar 2024
Overview
REV0.0.1 RNQMCD GS AHT21 is an open-source printed circuit board by GroundStudio, from the GroundStudio/GroundStudio_AHT21_module repository on GitHub. It is a 2-layer board of 22.9 × 20.3 mm with 21 parts on 9 nets, routed with 113 tracks and 21 vias.
It is built around the AHT21, 1.0T-4P卧贴 and 0402B104K160CT, with the LDK105CBJ106MVLF, TZ-P2-0402RTIA1-0.45T and MTP125-1104S1 among its other parts. Its parts include 4 resistors, 2 capacitors, 2 connectors, 2 crystals and 1 IC.
Main components
6AHT21
SMD-6P,3x3mmSMD-6P,3x3mm Temperature and Humidity Sensor ROHSAosong ElecTemperature And Humidity Sensor
1.0T-4P卧贴
SMD,P=1mm,卧贴-25℃~+85℃ 1 1A 1mm 1x4P 4 4P 50V Beige LCP Phosphor Bronze SH Surface Mount, Right Angle Tin UL94V-0 SMD,P=1mm,卧贴 Wire To Board Connector ROHSBOOMELEWire To Board Connector
0402B104K160CT
0402100nF 16V X7R ±10% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSWalsin TechnologyMultilayer Ceramic Capacitors MLCC - SMD/SMTLDK105CBJ106MVLF
040210V 10uF X5R ±20% 0402 Multilayer Ceramic Capacitors MLCC - SMD/SMT ROHSTaiyo YudenMultilayer Ceramic Capacitors MLCC - SMD/SMT
TZ-P2-0402RTIA1-0.45T
0402-40℃~+80℃ 1.8V~2.4V 120° 200mcd 20mA 60mW 620nm~625nm 633nm Discrete Diode Red Water Clear 0402 LED Indication - Discrete ROHSTUOZHANLED Indication - Discrete
MTP125-1104S1
插件,P=2.54mm-40℃~+105℃ 1 1x4P 2.54mm 2.5mm 3A 3mm 4P 6mm Black Brass Square pin Through Hole Plugin,P=2.54mm Pin Headers ROHSMINTRONPin Headers
README
README.mdGroundStudio AHT21 module
Get it from ardushop.ro
Explore all the GroundStudio products at GroundStudio.ro
Description
Temperature and humidity sensor module based on AHT21 chip.
Contents
- /Documentation -- Contains documentation written during creation of this repository, with readme.md index of its own!
- /Firmware -- Firmware (bootloaders, etc)
- /Hardware -- Schematics, layout.
- /Libraries -- Arduino/CircuitPython libraries.
- /Tools -- Tools needed for compiling, uploading bootloader, etc.
Versions
(Not all tags shown)
- [V0.0.1] Initial version
License
This is released under the Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) license. You are welcome to use this for commercial purposes.
Please consider contributing back to this project or others to help the open-source hardware community continue to thrive and grow!
Certifications:
Open Source Hardware Association
Parts
21| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | R_0402_10k | GS_Local:R_0402_alt | R1, R3, R4 |
| 2 | i2c_3V3 | GS_Local:SH__1x04_P1.00mm_Horizontal | X1, X2 |
| 1 | AHT21 | GS_Local:AHT | U1 |
| 1 | C_0402_100nF_16V | GS_Local:C_0402_alt | C1 |
| 1 | C_0402_10uF_10V | GS_Local:C_0402_alt | C2 |
| 1 | LED_0402_RED | GS_Local:LED_0402_alt | D1 |
| 1 | LOGO | GS_Branding:GS_Logo2_5x5 | G*** |
| 1 | LOGO | GS_Branding:GS_.ro_1.2x0.6 | G*** |
| 1 | LOGO | GS_Branding:GS_Logo2_4x4 | G*** |
| 1 | LOGO | GS_Branding:GS_Made in Romania_13.8x1.4 | G*** |
| 1 | LOGO | GS_Branding:GS_GroundStudio_14.6x1.8 | G*** |
| 1 | PinHeader_1x04_P2.54_V_M | GS_Local:PinHeader_1x04_P2.54mm_Vertical_Male | J2 |
| 1 | R_0402_330 | GS_Local:R_0402_alt | R2 |
| 1 | SolderJumper_NC | GS_Local:SolderJumper_NC | J1 |
The 17 most common of 21 parts.
Similar boards
- 2 layers43.2 × 17.7 mm
- 4 layers43.2 × 17.8 mm
- 4 layers25 × 100 mm
Mini SiD
Safecast/bGeigieScint
The board features an integrated boost converter + linear regulator topology for SiPM bias generation:
48 parts2 - 4 layers82 × 56 mm
Spe converter
vl9i/spe-converter
Open-Source SPE-to-Ethernet converter board with SFP, RJ45, H-MTD and MATEnet
206 parts - 6 layers95.9 × 90.2 mm
PHAT-3-Main Board
UWCubeSat/PHAT-3-Main-Board
PCB design for the PHAT-3 weather balloon payload's main board, housing a radio, sensors, camera, and buck converter.
34 parts3 - 2 layers100 × 100 mm
PcbV10
klaus-liebler/labathome
Der kleine Bruder von lab@home. Ermöglicht das Experimentieren mit PT1...PTn-Gliedern, die intern als RC-Kombination (entkoppelt über Operationsverstärker) ausgeführt sind.
221 parts5MIT - 2 layers71 × 71 mm
SensactUp3
klaus-liebler/sensact
Es gibt vier Namespaces für Nachrichten "REQUEST" und "RESPONSE", "EVENT" und "ACKNOWLEDGE". Dies wird mit den beiden LSB des Versions-Namespace-Bytes erklärt (Somit bleiben 64 Versionierungsmöglichkeiten) Alle vier…
80 parts4Apache-2.0
Questions
How big is the REV0.0.1 RNQMCD GS AHT21 PCB?
It measures 22.9 × 20.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the REV0.0.1 RNQMCD GS AHT21 use?
21 parts, built around the AHT21, 1.0T-4P卧贴, 0402B104K160CT and LDK105CBJ106MVLF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the REV0.0.1 RNQMCD GS AHT21 KiCad files?
From the GroundStudio/GroundStudio_AHT21_module repository on GitHub, at the commit this page was made from: the board is Hardware/REV0.0.1 - Kicad6/REV0.0.1 RNQMCD_GS AHT21.kicad_pcb and its schematic Hardware/REV0.0.1 - Kicad6/REV0.0.1 RNQMCD_GS AHT21.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the REV0.0.1 RNQMCD GS AHT21 design in my own project?
Its repository states no licence, so its author keeps all rights: ask GroundStudio before reusing the design.