Skip to the content
2 layers40 × 30 mmGolden coupon, the printed circuit board in 3D

These are editable software demonstrations, not manufacturer-approved reference designs.

Size
40 × 30 mm
Copper layers
2
Thickness
1.6 mm
Parts
9
Nets
3
Pads
10
Tracks, vias
8, 1
Routed
Yes
KiCad
KiCad 8 (file 20240108)
Created
17 Sep 2026
Updated
19 Sep 2026

Overview

Golden coupon is an open-source printed circuit board by GreenShoeGarage, from the GreenShoeGarage/Copperbench repository on GitHub, published under the MIT licence. It is a 2-layer board of 40 × 30 mm with 9 parts on 3 nets, routed with 8 tracks and 1 via.

README

examples/README.md

Example boards and test files

These are editable software demonstrations, not manufacturer-approved reference designs.

  • everyday-maker-sampler.json: unconnected layout of 14 representative v1.4 parts. It is a visual/layout demonstration, not a complete circuit.
  • uno-r3-shield-icsp.json: Uno shield interface with six optional main-MCU ICSP contacts appended to the original 32 perimeter contacts. Check the physical host and mating connectors.
  • polarity-and-silkscreen.json: visual software proof of diode/LED/capacitor role labels, both-face text, drawings and filled image geometry. It is not a working circuit.
  • power-ground-planes.json: small software fixture with top +5V and bottom GND pours, a through-hole ground seed and a surface-mount ground attachment through a short trace and via. Imported pours refill automatically. This is a geometry demonstration, not a powered circuit.
  • starter.json: small through-hole learning board with explicit nets to route.
  • little-light-routed.json: that board routed through the actual browser interface during release testing; no blocking geometry findings in that exercised state. Its generic parts still require datasheet verification.
  • smd.json: surface-mount layout exercise.
  • mixed.json: mixed through-hole/SMD and two-face exercise.
  • golden-coupon.json: 40 × 30 mm geometric regression fixture with top, bottom and via-linked nets, through pads, one NPTH round hole, one NPTH slot and text.
  • golden-coupon.kicad_pcb and golden-fabrication/: generated interchange/manufacturing files for that regression fixture.

The golden coupon's verified part flag identifies controlled software test geometry, not a certification against a particular purchased component. It is labelled as a software fixture in its evidence record. No example has been physically fabricated or submitted to a manufacturer as part of this release.

Regression suites write new fixtures, files and screenshots under ignored tests/output/, not these checked-in examples. IDs in test outputs may change without changing their geometric purpose.

The golden manufacturing files were regenerated with v1.3.1 to remove the old silkscreen clear-frame defect. Re-export any older manufacturing ZIPs; see the correction guide.

Parts

9
QtyValueFootprintReferences
6Test pointCopperbench:Test point · 2 mmTP1, TP2, TP3, TP4, TP5, TP6
11×2 / 2.54Copperbench:Header · 1 × 2J1

The 7 most common of 9 parts.

Similar boards

  • 2 layers103 × 30.5 mmTS Back Endcap, the printed circuit board in 3D

    TS Back Endcap

    EEVengers/ThunderScope

    ThunderScope GitHub Repo

    9 parts1.3kMIT
  • 2 layers31.8 × 47.6 mmNGC 38 connector, the printed circuit board in 3D

    NGC 38 connector

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    9 parts1.2k
  • 2 layers24 × 27.3 mmExpansion Card Retrofit, the printed circuit board in 3D

    Expansion Card Retrofit

    FrameworkComputer/ExpansionCards

    Reference designs and documentation to create Expansion Cards for the Framework Laptop

    9 parts1.1kCC-BY-4.0
  • 2 layers15.6 × 17.3 mmSKR Mini TFT Thermistor Board, the printed circuit board in 3D

    SKR Mini TFT Thermistor Board

    VoronDesign/Voron-Hardware

    Cool Hardware designed by the Voron Design group

    9 parts1.1kGPL-3.0
  • 2 layers39.1 × 49.5 mmLearnoliver, the printed circuit board in 3D

    Learnoliver

    hackclub/OnBoard

    💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

    9 parts915
  • 2 layers17.4 × 16.9 mmToolhead, the printed circuit board in 3D

    Toolhead

    tanaes/whopping_Voron_mods

    9 parts787GPL-3.0
  • 2 layers9.8 × 108 mmExpander, the printed circuit board in 3D

    Expander

    wntrblm/Castor_and_Pollux

    A Juno-inspired dual oscillator

    9 parts587
  • 2 layersKeyboard after, the printed circuit board in 3D

    Keyboard after

    adamws/kicad-kbplacer

    KiCad plugin for automatic keyboard's key placement and routing

    9 parts547GPL-3.0

Questions

How big is the Golden coupon PCB?

It measures 40 × 30 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Golden coupon use?

9 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Golden coupon KiCad files?

From the GreenShoeGarage/Copperbench repository on GitHub, at the commit this page was made from: the board is examples/golden-coupon.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Golden coupon design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).