Skip to the content
2 layers167.6 × 77.5 mmRelay, the printed circuit board in 3D
Size
167.6 × 77.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
92
Nets
105
Pads
288
Tracks, vias
614, 36
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
14 Aug 2023
Updated
22 Aug 2023

Parts

92
QtyValueFootprintReferences
181kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2, R3, R4, R5, R6, R7, R10, R16, R17, R19, R20, R21, R22, R23, R24 +2
10LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1, D3, D5, D7, D9, D11, D12, D14, D16, D18
9BC847Package_TO_SOT_SMD:SOT-23Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q9
9DDiode_SMD:D_SMA_HandsolderingD2, D4, D6, D8, D10, D13, D15, D17, D19
9G5LE-1Relay_THT:Relay_SPDT_Omron-G5LE-1K1, K2, K3, K4, K5, K6, K7, K8, K9
9PC817Package_DIP:DIP-4_W7.62mmU1, U2, U3, U4, U5, U7, U9, U10, U11
510kResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR11, R12, R13, R14, R15
4PGHTerminalBlock:TerminalBlock_bornier-3_P5.08mmJ5, J9, J10, J11
210uCapacitor_SMD:CP_Elec_4x5.3C2, C3
21uCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC4, C5
2ButtonButton_Switch_SMD:SW_Push_1P1T_NO_CK_KSC6xxJSW1, SW2
1100nCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1
11KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR18
174HC595Package_SO:SOIC-16_3.9x9.9mm_P1.27mmU12
1AMS1117-3.3Package_TO_SOT_SMD:SOT-223-3_TabPin2U8
1ESP-12ERF_Module:ESP-12EU6
1Jack-DCConnector_BarrelJack:BarrelJack_SwitchcraftConxall_RAPC10U_HorizontalJ6
1NetTie_2NetTie:NetTie-2_THT_Pad0.3mmNT1
1PTerminalBlock:TerminalBlock_bornier-3_P5.08mmJ8
1PTATerminalBlock:TerminalBlock_bornier-3_P5.08mmJ3
1PTBTerminalBlock:TerminalBlock_bornier-3_P5.08mmJ4
1TAPTerminalBlock:TerminalBlock_bornier-3_P5.08mmJ1
1TBPTerminalBlock:TerminalBlock_bornier-3_P5.08mmJ2
1TO_FTDIConnector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_VerticalJ7

Similar boards

  • 2 layers101.6 × 147.3 mmKarabas pro revER, the printed circuit board in 3D

    Karabas pro revER

    andykarpov/karabas-pro

    FPGA based retrocomputer with FDD and HDD controllers

    223 parts37MIT
  • 2 layers41 × 28 mmAquarea, the printed circuit board in 3D

    Aquarea

    slqa/aquarea_esphome

    I used hardware serial on pins GPIO15/GPIO13 and one pin for RTS from a GPIO5 Mini ESP board. In a 'normal' situation, the ESP12E only listens to communication between the remote and the heat pump, so you can have…

    30 parts3
  • 2 layers67 × 96 mmTo the moon, the printed circuit board in 3D

    To the moon

    Krakert/To-the-moon

    63 parts
  • 2 layers98.2 × 47.9 mmOscBoardV12, the printed circuit board in 3D

    OscBoardV12

    shreya2717/Solar-Rooftop-Financing-Market-Risk-Analysis

    Solar energy is the cleanest and most available renewable energy source. The Modern technology can harness this energy for a variety of uses, including producing electricity, providing light and heating water for…

    114 parts
  • 2 layers106.9 × 42.2 mmFume ex, the printed circuit board in 3D

    Fume ex

    t2ofaced/Fume-ex

    Fume extractor

    56 partsMIT
  • 4 layers101.6 × 147.3 mmKarabas go, the printed circuit board in 3D

    Karabas go

    andykarpov/karabas-go-pcb

    Karabas-Go PCB

    311 parts3
  • 2 layers80.6 × 29.2 mmBrain, the printed circuit board in 3D

    Brain

    c3dprk/split-flap

    Reverse Engineering and Engineering of OMEGA split-flap displays

    56 parts16MIT

Questions

How big is the Relay PCB?

It measures 167.6 × 77.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Relay use?

92 parts, built around the ESP-12E, 74HC595, AMS1117-3.3 and BC847. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Relay KiCad files?

From the Greatreyhan/pcb_control_pgs repository on GitHub, at the commit this page was made from: the board is relay.kicad_pcb and its schematic relay.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Relay design in my own project?

Its repository states no licence, so its author keeps all rights: ask Greatreyhan before reusing the design.