
STP240320 0200B b2b
Gigahawk/STP240320_0200B_b2b
Board to Board adapter for STP240320_0200B display

Board to Board adapter for STP240320_0200B display
STP240320 0200B b2b breakout is an open-source printed circuit board by Gigahawk, from the Gigahawk/STP240320_0200B_b2b repository on GitHub. It is a 2-layer board of 35.6 × 59.2 mm with 18 parts on 24 nets, routed with 207 tracks and 31 vias.
It is built around the 74HC4050D, AP2112K-3.3 and LM809M3X-2.93, with the BSS138 among its other parts. Its parts include 5 resistors, 3 capacitors, 3 ICs, 2 connectors and 1 transistor. It belongs with the interfaces and adapters boards of this library.
A PCB that adapts the ribbon connector of the STP240320_0200B_b2b to a Molex SlimStack 55560-0168
The footprint used is the KiCad native 55560-0161, there doesn't seem to be an appreciable difference.

The STP240320_0200B is a 2.0" 240x320 ST7789 based TFT display. It is used in many 2.0" ST7789 display modules, some examples:
The display itself can be purchased from Surenoo Display on AliExpress, if you find other vendors please feel free to open an issue or PR.

The flex ribbon connector isn't designed to go into a FFC connector, so this board is used to connectorize the display.
I have recently purchased more of these displays and they are not the same as the displays I originally purchased back in 2020, nor do they match the picture in the listing.
Original is on the left, the display I recently received on the right:

While I have not tested this new display with the adapter, visually they appear to be functionally identical. The display housing has the exact same outer dimensions. The connector has the same number of pins with the same pitch and in the same order. The connector location relative to the display housing appears to be the same as well
Since I have not tested the display yet with the breakout, I do not know whether:
The STP240320_0200B_b2b folder contains KiCad files for the board to board adapter shown above
The STP240320_0200B_b2b_breakout folder contains KiCad files for a breakout board similar to the Adafruit breakout with a matching Molex SlimStack 54722-0164.

There appear to be similar displays with SPI interfaces that have FPCs suitable for direct connection into an FFC connector.
The STP240320_0200A sold from the same link above is listed as an 8-bit parallel interface only, but the display looks suspiciously close to some other listings on AliExpress:
These listings list pins 3 and 4 as IM1 and IM2, which can be used to set the display mode to 8-bit parallel or SPI.
LCD Wiki documents a breakout board using this display, with a schematic showing the IMx pins configuring the display for SPI operation.
The schematic has a link to http://www.qdtft.com, but they don't seem to list this module anymore.
There are a few vendors on AliExpress that appear to be selling this breakout:
I've purchased breakouts from the first link in the above list (XunMing Store), some notes about them:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 10k | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R3, R4, R5 |
| 3 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2, C3 |
| 2 | MountingHole | MountingHole:MountingHole_2.5mm_Pad | H1, H2 |
| 1 | 10R | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R2 |
| 1 | 74HC4050D | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U1 |
| 1 | AP2112K-3.3 | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | BSS138 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Conn_01x11 | Connector_PinHeader_2.54mm:PinHeader_1x11_P2.54mm_Vertical | J2 |
| 1 | LM809M3X-2.93 | Package_TO_SOT_SMD:SOT-23 | U3 |
| 1 | Logo_Open_Hardware_Small | Gigahawk:OSHW-Logo2_9.8x8mm_Mask | LOGO1 |
| 1 | Micro_SD_Card_Det_Hirose_DM3AT | Connector_Card:microSD_HC_Hirose_DM3AT-SF-PEJM5 | J1 |
| 1 | STP240320_0200B | Connector_Molex:Molex_SlimStack_54722-0164_2x08_P0.50mm_Vertical | DISP1 |

Gigahawk/STP240320_0200B_b2b
Board to Board adapter for STP240320_0200B display

oomlout/oomlout_oomp_project_bot_v_2







joshajohnson/Hub20
Hub20 is a numpad with a bunch of features you never knew you needed.
It measures 35.6 × 59.2 mm and has 2 copper layers, 1.6 mm thick.
18 parts, built around the 74HC4050D, AP2112K-3.3, LM809M3X-2.93 and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Gigahawk/STP240320_0200B_b2b repository on GitHub, at the commit this page was made from: the board is STP240320_0200B_b2b_breakout/STP240320_0200B_b2b_breakout.kicad_pcb and its schematic STP240320_0200B_b2b/STP240320_0200B_b2b.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Gigahawk before reusing the design.