

AudioOutputPCB Balanced
a small, modular and affordable DSP Module
- Size
- 110 × 70 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 178
- Nets
- 73
- Pads
- 444
- Tracks, vias
- 623, 253
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 4 Sep 2023
- Updated
- 8 May 2024
Overview
AudioOutputPCB Balanced is an open-source printed circuit board by Gemuesesaft, from the Gemuesesaft/SmallDSP repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 110 × 70 mm with 178 parts on 73 nets, routed with 623 tracks and 253 vias.
It is built around the NE5532, H5VL10B and NC3MAAH. Its parts include 74 resistors, 71 capacitors, 8 diodes, 6 ICs and 6 connectors.
Main components
3NE5532
SOP-8-22V~22V 0℃~+70℃ 100dB 10nA 14mA 2 40V/us 42mA 4mV 800nA 8nV/√Hz@30Hz Built-in compensation SOP-8 Operational Amplifier ROHSSungineOperational AmplifierH5VL10B
DFN1006-2L-55℃~+125℃ 1 100nA 10V 15pF 5.6V 50W 5A 5V Bidirectional ESD IEC 61000-4-2、IEC 61000-4-5 DFN1006-2L ESD and Surge Protection (TVS/ESD) ROHShongjiachengESD And Surge Protection (TVS/ESD)NC3MAAH
插件3P Male Right Angle XLR 插件 XLR (Cannon) ConnectorsNeutrikCircular Connectors & Cable Connectors
README
README.mdSmallDSP
a small, modular and affordable Audio DSP Module
The goal of this Project is to create a line-up of small DSP modules, centred around an Analog Devices ADAU1463/67. This Chip is easy to program with Sigma Studio, a node based development environment and pretty powerful for its price.
Current status:
- Dual: Rev 1.1: Layout finished, functionality has to be validated.
- Maxi: Rev 1.0 functional, layout of rev 2.0 finished and production ready, has to be evaluated. AES17 audio measurements of rev 1.0 available.
- Mini: Nothing done yet.
- Micro: Nothing done yet.
- Digi: Nothing done yet.
I've planed for 5 different modules:
- A compact one with two analogue input and output channels (SmallDSP Dual).
- A very small with only digital I2S IOs (SmallDSP Digi).
- A very small module with only one analogue input and output (SmallDSPMini).
- A similar than the Mini, but with and Microphone preamp (SmallDSP Micro). Perhaps powered by phantom power.
- And one with up to 32 analogue IOs (SmallDSP Maxi).
There are three different versions of the used DSP Chip:
- The ADAU1463WBCPZ150. This is a slower version (max. 150MHz) with 48kWords data memory and 16kWords program memory. Optimal for the smaller Boards like the Dual, Mini or Micro.
- The ADAU1463WBCPZ300. This is a faster version (max. 300MHz) with the same 48kWords data memory and 16kWords program memory. Well suited for heavy processing or many channels, for example the Maxi.
- And the ADAU1467WBCPZ300. This is also a faster version (max. 300MHz) with more memory 80kWords data and 24kWords program memory. The expanded memory is useful if long delays on multiple channels are required. All versions are pin-compatible, so one can use the version, best suited for the use case.
The Dual, Digi, Mini and if phantom power isn't possible, the Micro, shall be powered by a single output wall brick power supply. Both Multi and Maxi are using a +-5V power supply and feature a PE connection. They are therefore designed for a metal enclosure such a 19" Rack enclosure.
I try to maximize the components covered by JLCPCBs Basic Parts library, so the boards can be manufactured cheaply and easily. Unfortunately this doesn't cover all components, so there is still some hand soldering necessary.
I tried to avoid the use of a Microcontroller, because the DSP can do pretty much everything on itself. Although the DSP can act as a I2C or SPI master, I used ADCs and DAC that are configured directly by setting specific pins, because the usage of the I2C/SPI master feature an ADAU DSPs is, at least to my knowledge, not very user-friendly. Please correct me if I'm wrong there I would very much like to know an easy way to use this feature. The Maxi is an exception in that, as it has a STM32 MCU on board. That is because the used Codecs are only controllable over I2C/SPI and are way cheaper than pin-controllable alternatives.
A detailed documentation is planned, but the current focus lies on finishing the PCBs and the testing of those. Detailed performance measurements will be published here as well, as soon as they are made.
Parts
178| Qty | Value | Footprint | References |
|---|---|---|---|
| 48 | 10k | Resistor_SMD:R_0805_2012Metric | R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25 +32 |
| 40 | 100u | Capacitor_SMD:C_1206_3216Metric | C16, C17, C18, C19, C20, C21, C22, C23, C24, C25, C26, C27, C28, C29, C30, C31 +24 |
| 20 | 100n | Capacitor_SMD:C_0402_1005Metric | C1, C2, C4, C5, C10, C11, C36, C37, C38, C39, C42, C43, C44, C45, C46, C47 +4 |
| 8 | 100k | Resistor_SMD:R_0402_1005Metric | R1, R2, R3, R4, R39, R40, R41, R42 |
| 8 | 1k | Resistor_SMD:R_0402_1005Metric | R35, R36, R37, R38, R71, R72, R73, R74 |
| 8 | 22p | Capacitor_SMD:C_0402_1005Metric | C12, C13, C14, C15, C48, C49, C50, C51 |
| 8 | 47R | Resistor_SMD:R_0402_1005Metric | R31, R32, R33, R34, R67, R68, R69, R70 |
| 8 | H5VL10B | 1_Project_Footprints:DFN1006-2_Bipolar | D1, D2, D3, D4, D5, D6, D7, D8 |
| 6 | NE5532 | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U1, U2, U3, U4, U5, U6 |
| 4 | Jumper | Jumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4 |
| 4 | NC3MAAH | 1_Project_Footprints:Jack_XLR_Neutrik_NC3MAAH_Horizontal | J3, J4, J5, J6 |
| 4 | Pot 1k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV2, RV3, RV4 |
| 3 | 10u | Capacitor_SMD:C_1206_3216Metric | C3, C40, C41 |
| 2 | 10k | Resistor_SMD:R_0402_1005Metric | R5, R6 |
| 2 | IDC | Connector_IDC:IDC-Header_2x06_P2.54mm_Vertical | J1, J2 |
| 2 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_Pad_Via | H1, H2 |
| 1 | LOGO | 1_Project_Footprints:OpenHardware_600dpi | G*** |
| 1 | LOGO | 1_Project_Footprints:Strix_paint_300dpi | G*** |
| 1 | LOGO | 1_Project_Footprints:Strix_paint_600dpi | G*** |
More from Gemuesesaft/SmallDSP
5- 4 layers120 × 120 mm

- 4 layers100 × 100 mm

- 4 layers90 × 100 mm

- 4 layers80 × 50 mm

AudioOutputPCB Unbalanced
Gemuesesaft/SmallDSP
a small, modular and affordable DSP Module
113 parts1GPL-3.0 - 4 layers80 × 40 mm

AudioInputPCB Unbalanced
Gemuesesaft/SmallDSP
a small, modular and affordable DSP Module
89 parts1GPL-3.0
Similar boards
- 2 layers63.5 × 76.2 mm

- 4 layers109 × 86 mm

- 4 layers65 × 56 mm

PI DMX hat
Skrooter/PI-DMX-hat
A DMX hat for Raspberry pi which can also be used to power a Pi from 12V
53 parts - 2 layers100 × 30 mm

- 4 layers86 × 34 mm

Bsl drv v1
jackw01/scanlight
A better light source for scanning color negative film
157 parts397CERN-OHL-W-2.0 - 4 layers50 × 50 mm

ESP32-Sentinel Kinetic Wireless Dongle
alextrical/ESP32-Sentinel-Kinetic-Wireless-Dongle
ESP8266 based Re-implementation of the Vent-Axia Sentinel Kinetic Wired Remote Controller without a Display
81 parts6CERN-OHL-S-2.0 - 2 layers49 × 67 mm

Calliope mirror heater
openUC2/TechnicalDocs-openUC2-HoloBox
This is the holographic box for openUC2
67 parts5 - 4 layers84 × 74.5 mm

Questions
How big is the AudioOutputPCB Balanced PCB?
It measures 110 × 70 mm and has 4 copper layers, 1.6 mm thick.
What parts does the AudioOutputPCB Balanced use?
178 parts, built around the NE5532, H5VL10B and NC3MAAH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the AudioOutputPCB Balanced KiCad files?
From the Gemuesesaft/SmallDSP repository on GitHub, at the commit this page was made from: the board is Electronics/AudioOutputPCB_Balanced/AudioOutputPCB_Balanced.kicad_pcb and its schematic Electronics/AudioInputPCB_Balanced/AudioInputPCB_Balanced.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the AudioOutputPCB Balanced design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).