Skip to the content
2 layers326.8 × 111 mmRight, the printed circuit board in 3D
Size
326.8 × 111 mm
Copper layers
2
Thickness
1.6 mm
Parts
99
Nets
60
Pads
496
Tracks, vias
801, 103
Pours
291
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
22 Dec 2025
Updated
28 Jul 2026

Overview

Right is an open-source printed circuit board by Ge0ll, from the Ge0ll/babayka repository on GitHub. It is a 2-layer board of 326.8 × 111 mm with 99 parts on 60 nets, routed with 801 tracks and 103 vias.

Its parts include 40 diodes and 40 switches. It belongs with the nRF52 and nRF5x boards of this library.

README

README.md

babayka

Parts

99
QtyValueFootprintReferences
40ceoloide:switch_choc_v1_v2S1, S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23 +24
40ceoloide:diode_tht_sod123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +24
7, , , , , ,
2ceoloide:reset_switch_smd_sideRST1, RST1
2ceoloide:battery_connector_jst_ph_2JST1, JST1
2ceoloide:power_switch_smd_sidePWR1, PWR1
2xiao-ble-thruholetemp:xiao-pogo-revU?, U?
1ceoloide:rotary_encoder_ec11_ec12RE1

The 96 most common of 99 parts.

More from Ge0ll/babayka

2
  • 2 layers366.5 × 99.2 mmRight, the printed circuit board in 3D

    Right

    Ge0ll/babayka

    84 parts
  • 2 layers163.1 × 111 mmLeft, the printed circuit board in 3D

    Left

    Ge0ll/babayka

    45 parts

Similar boards

  • 2 layers106.4 × 95 mmIsavideo, the printed circuit board in 3D

    Isavideo

    schlae/graphics-gremlin

    Open source retro ISA video card

    99 parts582CC-BY-SA-4.0
  • 2 layers100 × 110 mmKicad control board, the printed circuit board in 3D

    Kicad control board

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    99 parts171
  • 2 layers66.1 × 62.2 mmMimas, the printed circuit board in 3D

    Mimas

    numato/samplecode

    This repository contains sample code for different Numato Lab products

    99 parts144
  • 2 layers89.2 × 58.9 mm8In-8Out LAN9252-only, the printed circuit board in 3D

    8In-8Out LAN9252-only

    MetalMusings/MyOwnEtherCATDevice

    Documentation accompanying the "Make My Own EtherCAT device" video serie on Youtube.

    99 parts93
  • 2 layers151.1 × 93.4 mmESP32-P4 16, the printed circuit board in 3D

    ESP32-P4 16

    computergeek1507/PB_16

    Open source FPP PB16 Pixel Controller

    99 parts78
  • 2 layersISA FPGA CPU, the printed circuit board in 3D

    ISA FPGA CPU

    robfinch/Cores

    Cores ===== RTF's Cores Use at your own risk. Welcome to my galaxy of cores. Contained in the directories are IP cores, source code for digital circuits.

    99 parts78
  • 2 layers144.8 × 88.9 mmPotentiostat, the printed circuit board in 3D

    Potentiostat

    iorodeo/potentiostat

    Rodeostat design files, software and firmware

    99 parts57CC-BY-4.0
  • 2 layers38 × 65 mmSpe sink, the printed circuit board in 3D

    Spe sink

    Scottapotamas/spe-marine-node

    Prototype project to build an underwater sensor node, powered by and communicating with the surface via Single Pair Ethernet (10BASE-T1L + 802.3cg)

    99 parts34MIT

Questions

How big is the Right PCB?

It measures 326.8 × 111 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Right use?

99 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Right KiCad files?

From the Ge0ll/babayka repository on GitHub, at the commit this page was made from: the board is ergogen/right/output/right/right.kicad_pcb and its schematic ergogen/left/output/temp/temp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Right design in my own project?

Its repository states no licence, so its author keeps all rights: ask Ge0ll before reusing the design.