Skip to the content
2 layers70 × 55.5 mmTrack Device Shield, the printed circuit board in 3D

In this project i have designed and coded a shield for the STM32 Nucleo board L476RG.

Size
70 × 55.5 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
107
Pads
164
Tracks, vias
103, 24
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Apr 2026
Updated
20 Jul 2026

Overview

Track Device Shield is an open-source printed circuit board by GaleaIoanStefan, from the GaleaIoanStefan/Tracking-device-PCB repository on GitHub. It is a 2-layer board of 70 × 55.5 mm with 17 parts on 107 nets, routed with 103 tracks and 24 vias.

It is built around the CAM-M8Q-0. Its parts include 6 resistors, 4 capacitors, 3 connectors, 2 ICs and 1 switch.

Main components

1

README

README.md

Project description

In this project i have designed and coded a shield for the STM32 Nucleo board L476RG.

The shield is the prototype of a tracker that will update the position using a GPS module and a LoRa modem for communication with a server. The board is made to connect to the Orange LiveObjects server from which the data is put inside a MongoDB database and later a template is made in Grafana with the longitude and latitude coordinates. Two Python scripts are present in the project. One for getting the data from the LiveObjects through MQTT protocol, and the other links the data received to a endpoint. That endpoint in later linked to a Grafana JSON plugin to gather that data.

A T1000-E tracker was added to the Python scripting as well as configured inside the LiveObjects server for comparison between the two devices. The localization results and the Reveiced Signal Strength Index (RSSI) were compared in two separate GeoMap Grafana templates.

The programming of the board was done in STM32CubeIDE and all communications between The GPS, Lora and COM port were UART communications.

The Electrical Schematic

image

The layout of the PCB

image

The Results

Here we can see the developed tracking device marked with a green circle and the T1000 with a blue X. The notable difference between localization is given by measuring errors when one device was turned on while the other was not.

image

In the second plot it can be seen that the developed device is marked with a triangle while the T1000 is still marked with an X. Better performanes in the case of RSSI are recorded from the developed tracking device, meaning it has a smaller negative value. The broadcasted messages from the developed device were intercepted by a larger number of gateways throughout the city even when the spreading factor for both devices was the same.

image

Parts

17
QtyValueFootprintReferences
322ΩResistor_SMD:R_0402_1005MetricR3, R4, R5
2220ΩResistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolderR1, R2
2NCCapacitor_SMD:C_0805_2012MetricC3, C4
10ΩInductor_SMD:L_0603_1608MetricL1
14.7uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1
14.7uFCapacitor_SMD:C_0805_2012MetricC2
1470ΩResistor_SMD:R_0402_1005MetricR6
1CAM-M8QLicenta_Footprint_Library:CAM-M8U2
1CN10Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_VerticalJ2
1CN7Connector_PinSocket_2.54mm:PinSocket_2x19_P2.54mm_VerticalJ1
1SW_PushButton_Switch_THT:SW_PUSH_6mmSW1
1U.FL-R-SMT_01_Licenta_Footprint_Library:HRS_U.FL-R-SMT_01_J3
1Wio_E5_Lora moduleLicenta_Footprint_Library:Wio_E5_Lora module footprintU1

Similar boards

  • 8 layers163.5 × 123.5 mmYeti, the printed circuit board in 3D

    Yeti

    PionixPublic/reference-hardware

    BelayBox reference hardware

    278 parts70CERN-OHL-P-2.0
  • 6 layers34 × 56 mmVLF5, the printed circuit board in 3D

    VLF5

    McMaster-Rocketry-Team/VLF5

    106 parts1
  • 2 layers82.3 × 75.7 mmAir Schematic v1, the printed circuit board in 3D

    Air Schematic v1

    UCLA-Rocket-Project/Air-Schematic-v1

    19 parts1
  • 2 layers107 × 52 mmCelestialSync, the printed circuit board in 3D

    CelestialSync

    davidfobar/CelestialSync

    This an telescope mount controller inspired by OnStep and OpenAstroTracker, but written OOP to be maintainable.

    75 parts
  • 4 layers50 × 110 mmPika go 0, the printed circuit board in 3D

    Pika go 0

    PikaWave-org/pika-hardware

    Hardware design for all Pika models

    110 parts
  • 2 layers50 × 67 mmAlgonav o, the printed circuit board in 3D

    Algonav o

    pywebdesign/algonav-o

    24 parts
  • 2 layers165.9 × 88.9 mmGHOUL2, the printed circuit board in 3D

    GHOUL2

    UMDBPP/GHOUL

    Balloon Venting Neck Insert Payload

    37 parts1
  • 2 layers71.1 × 49.5 mmRDP Environmental, the printed circuit board in 3D

    RDP Environmental

    pbbp0904/HELEN

    The rendering above is a rough idea of what this payload will look like with some of its components installed.

    45 partsMIT

Questions

How big is the Track Device Shield PCB?

It measures 70 × 55.5 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Track Device Shield use?

17 parts, built around the CAM-M8Q-0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Track Device Shield KiCad files?

From the GaleaIoanStefan/Tracking-device-PCB repository on GitHub, at the commit this page was made from: the board is Track_Device_Shield.kicad_pcb and its schematic Track_Device_Shield.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Track Device Shield design in my own project?

Its repository states no licence, so its author keeps all rights: ask GaleaIoanStefan before reusing the design.