2 layers30 × 61.3 mm
2 layers99.9 × 99.7 mm
Super Mini Mega Tester
GadgetReboot/Super_Mini_Mega_Tester440 Pin Cable Tester platform using ESP32-C3
- Size
- 99.9 × 99.7 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 45
- Nets
- 135
- Pads
- 340
- Tracks, vias
- 884, 147
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 12 Nov 2024
- Updated
- 8 Mar 2025
Overview
Super Mini Mega Tester is an open-source printed circuit board by GadgetReboot, from the GadgetReboot/Super_Mini_Mega_Tester repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 99.9 × 99.7 mm with 45 parts on 135 nets, routed with 884 tracks and 147 vias.
Its parts include 9 capacitors, 6 resistors, 6 ICs, 5 connectors and 2 transistors. It belongs with the ESP32 and RISC-V boards of this library.
README
README.mdSuper_Mini_Mega_Tester
40 Pin Cable Tester platform using ESP32-C3 Super Mini module
JP1 through JP15 jumpers must have solder jumpers blobbed on to set the addresses of the five GPIO expander ICs.
Parts
45| Qty | Value | Footprint | References |
|---|---|---|---|
| 15 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm_NumberLabels | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8, JP9, JP10, JP11, JP12, JP13, JP14, JP15 |
| 8 | 100nF | Capacitor_THT:C_Disc_D3.8mm_W2.6mm_P2.50mm | C2, C3, C4, C5, C6, C7, C8, C9 |
| 5 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3, R4, R5, R6 |
| 5 | MCP23017_SP | Package_DIP:DIP-28_W7.62mm | U2, U3, U4, U5, U6 |
| 2 | 2N7000 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2 |
| 2 | Conn_01x05 | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J1, J5 |
| 2 | Conn_02x20_Odd_Even | Connector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_Vertical | J2, J3 |
| 1 | 4.7uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1 |
| 1 | 680r | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | ESP32-C3-Super-Mini | footprints:ESP32C3_Super_Mini | U1 |
| 1 | LED_Small_ALT | LED_THT:LED_D5.0mm | D1 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm_CircularMountingHoles | SW1 |
Similar boards
- 2 layers97 × 78.5 mm
Dumbpad
imchipwood/dumbpad
Simple 4x4 numpad with rotary encoder. Powered by QMK via ATmega32u4 Pro Micro
45 parts517GPL-2.0 - 2 layers49.8 × 88.9 mm
- 2 layers26.5 × 34.4 mm
PicoLoaderNSB
makeo/PicoLoader
A cheap and easy to install modchip for the Nintendo GameCube!
45 parts320GPL-2.0 - 2 layers40.2 × 19 mm
- 2 layers63.5 × 63.5 mm
Main pcb
peterkrull/quad
Firmware, hardware and documentation for my autonomous quad copter project
45 parts210GPL-3.0 - 2 layers99.1 × 81.9 mm
RC6502 Terminal
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
45 parts193GPL-3.0 - 2 layers116.1 × 94.7 mm
Questions
How big is the Super Mini Mega Tester PCB?
It measures 99.9 × 99.7 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Super Mini Mega Tester use?
45 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Super Mini Mega Tester KiCad files?
From the GadgetReboot/Super_Mini_Mega_Tester repository on GitHub, at the commit this page was made from: the board is KiCad/Super_Mini_Mega Tester.kicad_pcb and its schematic KiCad/Super_Mini_Mega Tester.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Super Mini Mega Tester design in my own project?
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).