
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

AY-3-8910 Sound Generator PCB controlled by Arduino Nano
AY-3-8910 is an open-source printed circuit board by GadgetReboot, from the GadgetReboot/AY-3-8910 repository on GitHub. It is a 2-layer board of 62.5 × 73.5 mm with 21 parts on 57 nets, routed with 172 tracks and 15 vias.
Its parts include 5 resistors, 4 capacitors, 3 connectors, 1 IC and 1 diode. It belongs with the AVR (ATmega, ATtiny) boards of this library.
AY-3-8910 Sound Generator PCB controlled by Arduino Nano

| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | MH1, MH2, MH3, MH4 |
| 2 | 1uF | Capacitor_THT:CP_Radial_D5.0mm_P2.50mm | C1, C3 |
| 1 | 100nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C2 |
| 1 | 1825910-6 | digikey-footprints:Switch_Tactile_THT_6x6mm | S1 |
| 1 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2 |
| 1 | 300r | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R5 |
| 1 | 4.7K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | 4.7nF | Capacitor_THT:C_Disc_D3.0mm_W1.6mm_P2.50mm | C4 |
| 1 | 470r | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3 |
| 1 | 75r | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4 |
| 1 | AY-3-8910 | Package_DIP:DIP-40_W15.24mm_LongPads | U1 |
| 1 | Arduino_Nano_Socket | Arduino:Arduino_Nano_Socket | M2 |
| 1 | AudioJack4 | footprints:Jack_3.5mm_PJ320A_Horizontal | J2 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J4 |
| 1 | LED_Small_ALT | LED_THT:LED_D5.0mm | D1 |
| 1 | LOGO | _Custom_Footprints:pcb way logo | G*** |
| 1 | UART | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 62.5 × 73.5 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the GadgetReboot/AY-3-8910 repository on GitHub, at the commit this page was made from: the board is KiCad/AY-3-8910.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask GadgetReboot before reusing the design.