

CanSat2020Probe
CanSat 2020
- Size
- 28 × 50 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 38
- Nets
- 82
- Pads
- 188
- Tracks, vias
- 400, 20
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 27 Oct 2019
- Updated
- 19 Aug 2020
Overview
CanSat2020Probe is an open-source printed circuit board by GJN-Aerospace, from the GJN-Aerospace/CanSat2020 repository on GitHub. It is a 2-layer board of 28 × 50 mm with 38 parts on 82 nets, routed with 400 tracks and 20 vias.
It is built around the TESEO-LIV3F, BME280 and MPU-9250. Its parts include 11 capacitors, 8 connectors, 6 resistors, 4 ICs and 4 diodes. It belongs with the STM32 boards of this library.
Main components
3TESEO-LIV3F
LCC-18(9.7x10.1)-163dBm -40℃~+85℃ 2.1V~4.3V GPS、BeiDou、Galileo、GLONASS RTC backup power UART、I2C LCC-18(9.7x10.1) GNSS Modules ROHSSTMicroelectronicsGNSS ModulesBME280
LGA-8(2.5x2.5)-40℃~+85℃ 0%RH~100%RH 1.71V~3.6V 1.8uA 16bit I2C、SPI ±0.5℃ ±3%RH LGA-8(2.5x2.5) Temperature and Humidity Sensor ROHSBoschTemperature And Humidity SensorMPU-9250
QFN-24-EP(3x3)-40℃~+85℃ 2.4V~3.6V 8uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C X,Y,Z X,Y,Z ±16g ±2000dps QFN-24-EP(3x3) Accelerometers ROHSTDK InvenSenseAccelerometers
README
README.mdCanSat 2020
GitHub repository for CanSat 2020 competitoin. You can find here a design of our CanSat probe PKII but also our Arduino code for openCanSat kit.
Probe
We designed our own probe. It name is "Cosmic Song II" or for short just CSII (in czech Píseň kosmická II, PKII). But we have in Software section a code for our backup probe from openCanSat kit.
GroundStation
We use as a our Ground Station a baseStation from openCanSat kit. So you can find in Software folder our code for it.
Links
Parts
38| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C4, C5, C6, C7 |
| 3 | LED | LED_SMD:LED_1206_3216Metric | D1, D2, D3 |
| 3 | R | Resistor_SMD:R_0805_2012Metric | R3, R4, R5 |
| 2 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | 15pF | Capacitor_SMD:C_0805_2012Metric | C2, C3 |
| 2 | 47uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C8, C10 |
| 2 | Conn_Coaxial | Connector_Coaxial:U.FL_Hirose_U.FL-R-SMT-1_Vertical | J5, J6 |
| 1 | 100k | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 10nF | Capacitor_SMD:C_0805_2012Metric | C9 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C11 |
| 1 | BME280 | Switch:BME280 | J1 |
| 1 | Conn_01x03_Male | Switch:Batt_PHS_Hor_Long18mm | J4 |
| 1 | Conn_01x03_Male | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | Conn_01x06_Male | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J7 |
| 1 | Crystal | Crystal:Crystal_SMD_HC49-SD | Y1 |
| 1 | D | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D4 |
| 1 | LD3985M33R_SOT23 | Package_TO_SOT_SMD:SOT-23-5_HandSoldering | U3 |
| 1 | LOGO | Switch:pkiiB | G*** |
| 1 | LOGO | Switch:gjna | G*** |
| 1 | LOGO | Switch:pkii | G*** |
| 1 | MPU-9250 | Switch:MPU-9250-4pin | J2 |
| 1 | Micro_SD_Card | Connector_Card:microSD_HC_Wuerth_693072010801 | J3 |
| 1 | RFM69W | RF_Module:HOPERF_RFM69HW | U2 |
| 1 | STM32F411RETx | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SW_DIP_x01 | Switch:Sw_ESP2010 | SW1 |
| 1 | TESEO-LIV3F | TESEO-LIV3F:SON110P970X1010X230-18N | IC1 |
Similar boards
- 4 layers99.7 × 108 mm

- 4 layers150 × 100 mm

- 4 layers25.4 × 42.9 mm

TESEO LIV3F uBUS
mkmielke/LIV3F_mikroBUS
The KiCAD project files for a mikroBUS add-on board featuring the Teseo-LIV3F GNSS module.
35 parts6 - 2 layers

- 2 layers19 × 26.6 mm

- 4 layers25 × 55 mm

- 2 layers128 × 16.9 mm

- 4 layers42 × 83.9 mm

StratoSoar MK2.2
crnicholson/StratoSoar-MK2
StratoSoar is an engineering project that aims to be able to fly a glider (dropped from a high-altitude balloon), down to any selected coordinates.
116 parts24
Questions
How big is the CanSat2020Probe PCB?
It measures 28 × 50 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CanSat2020Probe use?
38 parts, built around the TESEO-LIV3F, BME280 and MPU-9250. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CanSat2020Probe KiCad files?
From the GJN-Aerospace/CanSat2020 repository on GitHub, at the commit this page was made from: the board is Probe/Hardware/CanSat2020ProbeS/CanSat2020Probe.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the CanSat2020Probe design in my own project?
Its repository states no licence, so its author keeps all rights: ask GJN-Aerospace before reusing the design.
