Skip to the content
2 layers100.5 × 72 mmSistema Riego Inteligente, the printed circuit board in 3D
Size
100.5 × 72 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
42
Pads
62
Tracks, vias
56, 3
Pours
1
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
9 Jun 2025
Updated
25 Jun 2025

Overview

Sistema Riego Inteligente is an open-source printed circuit board by FrancoStrappazzon, from the FrancoStrappazzon/Sistema-Riego-Inteligente repository on GitHub. It is a 2-layer board of 100.5 × 72 mm with 7 parts on 42 nets, routed with 56 tracks and 3 vias.

It is built around the DHT11. Its parts include 3 ICs, 1 resistor, 1 diode and 1 connector. It belongs with the ESP32 boards of this library.

Main components

1

README

README.md

💧 Sistema de Riego Inteligente con ESP32

Este proyecto implementa un sistema de riego automático basado en microcontrolador ESP32. Permite controlar una electroválvula en función de las condiciones de temperatura y humedad, e incluye visualización local mediante pantalla OLED y control remoto a través de la app Blynk.

⚙️ Características del sistema

  • Microcontrolador: ESP32-WROOM-32

  • Sensor: DHT11 (temperatura y humedad)

  • Actuador: Módulo relé 1CH controlando una electroválvula de 12V

  • Visualización local: Pantalla OLED 1.3” (I2C)

  • Visualización y control remoto: App Blynk IoT

  • Fuente: 3.3V (lógica), 12V (electroválvula)

🛠️ Herramientas utilizadas

  • KiCad 9.0.0 – diseño de esquemático y PCB

  • Blynk IoT – plataforma de control y visualización remota

  • C++ / Arduino IDE – desarrollo del firmware

  • Git + GitHub – control de versiones

image

image

image

image

image

Parts

7
QtyValueFootprintReferences
11N4007Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
14.7kResistor_SMD:R_1206_3216MetricR1
1DEVKIT_V1_ESP32-WROOM-32DEVKIT_V1_ESP32-WROOM-32:MODULE_DEVKIT_V1_ESP32-WROOM-32U1
1DHT11Sensor:Aosong_DHT11_5.5x12.0_P2.54mmU2
1OLED_128X64_1.3_I2COLED_128X64_1.3_I2C:LCD_OLED_128X64_1.3_I2CDS1
1electroválvulaConnector_Phoenix_GMSTB:PhoenixContact_GMSTBA_2,5_2-G_1x02_P7.50mm_HorizontalJ1
1~relayModule:Relay_Module_1CHU3

Similar boards

  • 2 layers96.6 × 82.8 mmStarbie, the printed circuit board in 3D

    Starbie

    SharKingStudios/Starbie

    Half-Life Week 1 Example Project

    11 parts28MIT
  • 2 layers100 × 50 mmConveyor belt pcb, the printed circuit board in 3D

    Conveyor belt pcb

    lansidev/conveyor-belt

    Miniature 3D printed conveyor belt for simulation and fun working with sensors, all controllable with Raspberry Pi

    22 parts9MIT
  • 2 layers93 × 20 mmWiFi VFD, the printed circuit board in 3D

    WiFi VFD

    ciisaichan/WiFi-VFD

    开源的ESP8266驱动VFD屏电路,支持BiliBili粉丝数、时间、温度、湿度

    23 parts8MIT
  • 2 layersOpenMQTTGatewayPCB, the printed circuit board in 3D

    OpenMQTTGatewayPCB

    ebrithiljonas/OMG_PCB

    All in One PCB for the OpenMQTTGateway Project

    36 parts7GPL-3.0
  • 2 layers62 × 19.3 mmSniffingTrinket, the printed circuit board in 3D

    SniffingTrinket

    GeorgK/SniffingTrinket

    A room climate monitor using the Adafruit Trinket Pro

    23 parts6GPL-3.0
  • 2 layersArduino relay, the printed circuit board in 3D

    Arduino relay

    bhaskar9980/Guardian

    Guardian is an advanced, fully automated hydroponics system designed to optimize plant growth and maximize yield.

    58 parts5MIT
  • 2 layers100 × 43.5 mmFirefly, the printed circuit board in 3D

    Firefly

    Twistx77/Firefly

    Open WIFI-enabled RGB lamp with temperature, humidity, suspended air particles and eCO2 sensors.

    33 parts5GPL-3.0
  • 2 layers30.5 × 77.5 mmProyecto sensor temperatura, the printed circuit board in 3D

    Proyecto sensor temperatura

    unla-investigacion-desarrollo/ecosistema-iot

    Antes de desarrollar el sistema final, realizamos una etapa de exploración donde investigamos y experimentamos con las siguientes tecnologías:

    8 parts5

Questions

How big is the Sistema Riego Inteligente PCB?

It measures 100.5 × 72 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Sistema Riego Inteligente use?

7 parts, built around the DHT11. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sistema Riego Inteligente KiCad files?

From the FrancoStrappazzon/Sistema-Riego-Inteligente repository on GitHub, at the commit this page was made from: the board is Diseño-PCB/Sistema Riego Inteligente/Sistema Riego Inteligente.kicad_pcb and its schematic Diseño-PCB/Sistema Riego Inteligente/Sistema Riego Inteligente.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sistema Riego Inteligente design in my own project?

Its repository states no licence, so its author keeps all rights: ask FrancoStrappazzon before reusing the design.