

Am receiver
- Size
- 121.8 × 78.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 27
- Nets
- 45
- Pads
- 113
- Tracks, vias
- 233, 45
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 30 Jan 2025
- Updated
- 14 May 2025
Overview
Am receiver is an open-source printed circuit board by Fmb7k, from the Fmb7k/ECET-430-Group-ACM-Project repository on GitHub. It is a 2-layer board of 121.8 × 78.3 mm with 27 parts on 45 nets, routed with 233 tracks and 45 vias.
It is built around the ATMEGA328-PU, LM386 and 1N4148WT. Its parts include 6 capacitors, 3 resistors, 3 ICs, 3 connectors and 2 diodes. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
3ATMEGA328-PU
PDIP-28-40℃~+85℃ 1.8V~5.5V 10bit 1KB 20MHz 23 2KB 32KB 8 Bit AVR Built-in FLASH PDIP-28 Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)LM386
SOP-80.2% 0℃~+70℃ 4V~12V 4mA 50dB 700mWx1@8Ω Analog voltage gain SOP-8 Audio Amplifiers ROHSGcoreAudio Power OpAmps1N4148WT
SOD-523-55℃~+150℃ 1.25V@150mA 100V 150mA 150mW 1uA@75V 2A 4ns Independent SOD-523 Switching Diodes ROHShongjiachengSwitching Diodes
Parts
27| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 10K Pot | Potentiometer_SMD:Potentiometer_ACP_CA6-VSMD_Vertical | RV1, RV2 |
| 2 | 220p | Capacitor_SMD:C_0504_1310Metric | C5, C6 |
| 2 | 47u | Capacitor_SMD:CP_Elec_3x5.3 | PC1, PC2 |
| 1 | .05u | Capacitor_SMD:C_0504_1310Metric | C4 |
| 1 | 10 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 100k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 100n | Capacitor_SMD:C_0504_1310Metric | C3 |
| 1 | 12-120 pF | Capacitor_SMD:C_Trimmer_Murata_TZR1 | C1 |
| 1 | 16MHz | Crystal:Crystal_AT310_D3.0mm_L10.0mm_Horizontal | Y1 |
| 1 | 1N4007 | Diode_THT:D_DO-41_SOD81_P10.16mm_Horizontal | D2 |
| 1 | 1N4148WT | Diode_SMD:D_SOD-523 | D1 |
| 1 | 220 | Resistor_SMD:R_0402_1005Metric | R4 |
| 1 | 250u | Capacitor_SMD:CP_Elec_3x5.3 | PC3 |
| 1 | 4.7n | Capacitor_SMD:C_0504_1310Metric | C2 |
| 1 | 700u | Inductor_SMD:L_6.3x6.3_H3 | L1 |
| 1 | ATmega328-P | Package_DIP:DIP-28_W7.62mm | U2 |
| 1 | AVR-ISP-6 | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | Antenna | MountingHole:MountingHole_2.2mm_M2_DIN965_Pad | AE1 |
| 1 | Barrel_Jack_Switch | Connector_BarrelJack:BarrelJack_CUI_PJ-079BH_Horizontal | J1 |
| 1 | HD44780 16x2 LCD | Connector_PinSocket_2.00mm:PinSocket_1x16_P2.00mm_Vertical | J3 |
| 1 | LM386 | LM386:DIP08 | U1 |
| 1 | NCP1117-5.0_SOT223 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U3 |
| 1 | SW_DPST | Button_Switch_THT:SW_Push_2P1T_Toggle_CK_PVA1xxH1xxxxxxV2 | SW2 |
| 1 | Speaker | SPEAKER:PS12 | ST171 |
Similar boards
- 2 layers100 × 80 mm

- 2 layers99.1 × 80 mm

SEC T 0x10sion Badge
maltman23/SEC-T_0x10sion_Badge
SEC-T 0x10sion Music Synthesizer Badge kit
47 parts - 2 layers152 × 88 mm

RFBitBanger
profdc9/RFBitBanger
A QRP digital transceiver created from readily available parts for off-the-grid maintenance
226 parts222 - 2 layers99.5 × 49.5 mm

- 2 layers49 × 73 mm

- 2 layers90 × 140 mm

Drumkid
mattybrad/drumkid
Version 4 was the first successful working design, with full code, schematics, Gerbers, etc available on GitHub.
70 parts137 - 2 layers

LM80C R6
leomil72/LM80C
A Z80-based homebrew computer withTMS9918, AY-3-8910, Z80 CTC, Z80 PIO, and Z80 SIO
153 parts123GPL-3.0 - 2 layers145.3 × 44.5 mm

Questions
How big is the Am receiver PCB?
It measures 121.8 × 78.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Am receiver use?
27 parts, built around the ATMEGA328-PU, LM386 and 1N4148WT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Am receiver KiCad files?
From the Fmb7k/ECET-430-Group-ACM-Project repository on GitHub, at the commit this page was made from: the board is am-receiver.kicad_pcb and its schematic am-receiver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Am receiver design in my own project?
Its repository states no licence, so its author keeps all rights: ask Fmb7k before reusing the design.