Skip to the content
2 layers79.4 × 43.4 mmFishco's PCB Micropad, the printed circuit board in 3D

A personal micropad with capabilities to make custom binds with hotswappable 3d printed caps for flare. Mainly used for listening to music or lots of copy and pasting. Able to add profiles in code to customize buttons.

Size
79.4 × 43.4 mm
Copper layers
2
Thickness
1.6 mm
Parts
7
Nets
15
Pads
59
Tracks, vias
66, 4
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
10 Dec 2025
Updated
17 Apr 2026

Overview

Fishco's PCB Micropad is an open-source printed circuit board by FishcoScorp, from the FishcoScorp/Blueprint-MacroPad-2025 repository on GitHub. It is a 2-layer board of 79.4 × 43.4 mm with 7 parts on 15 nets, routed with 66 tracks and 4 vias.

Its parts include 5 switches, 1 IC and 1 connector. It belongs with the RP2040 boards of this library.

README

README.md

Blueprint-MacroPad-2025

This is a general overview

A personal micropad with capabilities to make custom binds with hotswappable 3d printed caps for flare. Mainly used for listening to music or lots of copy and pasting. Able to add profiles in code to customize buttons.

List of parts availibe on the BOM

Schematic

Screenshot 2025-11-29 at 7 44 55 PM This was the schematic created for this project

PCB

Screenshot 2025-12-09 at 10 33 19 PM PCB looking fire with the scorpian

DXF for the keyboard

Screenshot 2025-11-29 at 8 51 36 PM Screenshot 2025-11-29 at 8 51 29 PM

Creating the 3d models

Screenshot 2025-12-09 at 10 37 33 PM Screenshot 2025-12-09 at 10 38 02 PM Screenshot 2025-12-11 at 9 00 15 AM This is case, made sure that everything fit and even had a little wiggle room. Also added a cool caligraphic W for my name - Will

Code

Screenshot 2025-12-09 at 10 39 37 PM And this was the code that took me forever to do, I definitely overcomplicated this part but I must say I am very proud of it. Next project I might even try to incorperate some sort of app that would interface with the micro-controller if possible and say what song is playing or the current volume - right now the volume is just a guess. No clue if any of this code even works, haven't really had the chance to try it

Parts

7
QtyValueFootprintReferences
4SW_PushButton_Switch_Keyboard:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW3, SW4
1Conn_01x04OLED:SSD1306-0.91-OLED-4pin-128x32J1
1RotaryEncoder_SwitchRotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mmSW5
1XIAO-RP2040-DIPOPL:XIAO-RP2040-DIPU1

Similar boards

  • 2 layersEncoder, the printed circuit board in 3D

    Encoder

    byrantech/laptop

    anyon_e, a highly integrated, high end, open source laptop. Attempt the impossible.

    7 parts4.3kMIT
  • 2 layers40 × 20 mmSensor smd, the printed circuit board in 3D

    Sensor smd

    scottbez1/splitflap

    DIY split-flap display

    7 parts4.2k
  • 2 layers19.8 × 30 mmZ limit, the printed circuit board in 3D

    Z limit

    opulo-inc/lumenpnp

    The LumenPnP is an open source pick and place machine.

    7 parts3.7k
  • 2 layers35.6 × 58.2 mmDisplay Carrier, the printed circuit board in 3D

    Display Carrier

    AxxAxx/AxxSolder

    STM32 Based soldering station for JBC cartridges, 9-24 VDC and USB-PD power

    7 parts1.7kGPL-3.0
  • 2 layers20.3 × 16.3 mmMap MPX, the printed circuit board in 3D

    Map MPX

    rusefi/rusefi

    rusefi - GPL internal combustion engine control unit

    7 parts1.2k
  • 2 layers26 × 44 mmCompact carrier board, the printed circuit board in 3D

    Compact carrier board

    jamro/tiny-engineer

    A small desktop robot that brings an AI coding assistant to life, physically acting out when it reads files, thinks, writes code, and finishes work.

    7 parts1.1k
  • 2 layers26.4 × 53.8 mmAtari pickup, the printed circuit board in 3D

    Atari pickup

    hoglet67/RGBtoHDMI

    Bare-metal Raspberry Pi project that provides pixel-perfect sampling of Retro Computer RGB/YUV video and conversion to HDMI

    7 parts1kGPL-3.0
  • 2 layersRj45 breakout, the printed circuit board in 3D

    Rj45 breakout

    rene-dev/stmbl

    AC Servo Driver for STM32F4

    7 parts990GPL-3.0

Questions

How big is the Fishco's PCB Micropad PCB?

It measures 79.4 × 43.4 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Fishco's PCB Micropad use?

7 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Fishco's PCB Micropad KiCad files?

From the FishcoScorp/Blueprint-MacroPad-2025 repository on GitHub, at the commit this page was made from: the board is KiCad Files/Fishco's PCB Micropad.kicad_pcb and its schematic KiCad Files/Fishco's PCB Micropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Fishco's PCB Micropad design in my own project?

Its repository states no licence, so its author keeps all rights: ask FishcoScorp before reusing the design.