
AddOnA
freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth

Optical power meter PCB with RaspberryPi Pico
Optical meter is an open-source printed circuit board by Fifek225, from the Fifek225/opto_analyzer repository on GitHub. It is a 4-layer board of 60 × 67 mm with 46 parts on 48 nets, routed with 73 tracks and 27 vias.
It is built around the FIN1001M5X and FIN1002M5X. Its parts include 17 resistors, 14 capacitors, 3 ICs, 3 connectors and 2 diodes. It belongs with the sensors and measurement boards and the RP2040 boards of this library.
This is a project of a RaspberryPi Pico expander board for Optical power measurements. SFP connector acts as a receiver (analysis) and transmitter (test signals) of optical impulses. External attenuators can be used to "play" with the power level.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100n | Capacitor_SMD:C_0603_1608Metric | C6, C8, C9, C14, C15, C22, C23, C25, C26, C28, C29 |
| 6 | 4k7 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6, R7, R8, R10, R11, R20 |
| 4 | 137R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R12, R14, R16, R18 |
| 4 | 78R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13, R15, R17, R19 |
| 4 | ~ | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H4, H4, H6, H6 |
| 2 | 4u7 | Capacitor_SMD:C_0603_1608Metric | C10, C27 |
| 2 | BLM15HG102SN1D | Inductor_SMD:L_0402_1005Metric_Pad0.77x0.64mm_HandSolder | FR1, FR4 |
| 2 | LED | LED_SMD:LED_0603_1608Metric_Pad1.05x0.95mm_HandSolder | D1, D2 |
| 1 | 0R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1 |
| 1 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C16 |
| 1 | 680R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R2 |
| 1 | Conn_01x02_Pin | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J3 |
| 1 | Conn_02x04 | Connector_PinHeader_2.54mm:PinHeader_2x04_P2.54mm_Vertical | J1 |
| 1 | FIN1001M5X | LVDS_RX_lib:SOT95P280X140-5N | U3 |
| 1 | FIN1002M5X | LVDS_RX_lib:SOT95P280X140-5N | U2 |
| 1 | Pico | MCU_RaspberryPi_and_Boards:RPi_Pico_SMD_TH | U5 |
| 1 | SFP+ | SFP:Connector_SFP_and_Cage | J2 |
| 1 | SW Push | SW_Push:434123025816 | S2 |

freeDSP/freeDSP-aurora
freeDSP ADAU1452 with 8 analog input, 8 analog outputs, S/P-DIF I/O, ADAT I/O, USB Audio Class2, WiFi, Bluetooth




nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.


tomverbeure/fake_parallel_printer
Capture traffic on parallel printer port to USB

azonenberg/latentred
Open hardware 48x 1000baseT + 2x 25G SFP28 Ethernet switch
It measures 60 × 67 mm and has 4 copper layers, 1.61 mm thick.
46 parts, built around the FIN1001M5X and FIN1002M5X. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Fifek225/opto_analyzer repository on GitHub, at the commit this page was made from: the board is optical_meter/optical_meter.kicad_pcb and its schematic optical_meter/RaspiPico.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Fifek225 before reusing the design.