
A2C DVI Board
FarLeftLane/A2C_DVI_Board
Apple IIc adapter to use a A2DVI card for dvi/hdmi output

Apple IIc adapter to use a A2DVI card for dvi/hdmi output
A2C DVI Board is an open-source printed circuit board by FarLeftLane, from the FarLeftLane/A2C_DVI_Board repository on GitHub, published under the MIT licence. It is a 2-layer board of 31.5 × 79.5 mm with 14 parts on 63 nets, routed with 106 tracks and 2 vias.
It is built around the LM393. Its parts include 6 resistors, 3 capacitors, 2 ICs, 2 connectors and 1 switch. It belongs with the interfaces and adapters boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 2 | 0.1uf | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C2, C3 |
| 2 | 1K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R3, R5 |
| 1 | 0.33uf | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C1 |
| 1 | 10K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R6 |
| 1 | 10k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 22K | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R4 |
| 1 | A2C_DA15_Plug_MountingHoles | Apple II Library:DSUB-15_Male_Horizontal_P2.77x2.84mm_EdgePinOffset7.70mm_Housed_MountingHolesOffset9.12mm | J1 |
| 1 | A2E_Slot | Apple II Library:A2E_50pin_card_edge_female | J2 |
| 1 | Config | Apple II Library:PinSocket_1x03_P2.54mm_Vertical | SW1 |
| 1 | LM393 | Package_DIP:DIP-8_W7.62mm | U2 |
| 1 | LM7805_TO220 | Package_TO_SOT_THT:TO-220-3_Vertical | U1 |

FarLeftLane/A2C_DVI_Board
Apple IIc adapter to use a A2DVI card for dvi/hdmi output




schlae/snark-barker-mca
A Sound Blaster compatible sound card for Micro Channel bus computers

michaelruppe/FSAE
Projects for Formula SAE Electric Vehicle competition (Australia 2019/2020)

AllYarnsAreBeautiful/ayab-hardware
Contains the schematics and layouts for the AYAB Arduino shield

17o2/bluetooth-minidisc
Adding built-in bluetooth connectivity to a 20-year-old Mindisc player

bluepylons/USB-C-3-way-splitter
A splitter board (for making a cable splitter) for turning a 5V 3A USB power source to 3 5V 1A USB sources
It measures 31.5 × 79.5 mm and has 2 copper layers, 1.6 mm thick.
14 parts, built around the LM393. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the FarLeftLane/A2C_DVI_Board repository on GitHub, at the commit this page was made from: the board is v2_Board_Design/A2C_DVI_Board.kicad_pcb and its schematic v1_Board_Design/A2C_DVI_Board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).