
LevelShifter
gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

MainBoard Damashi is an open-source printed circuit board by Falcon-Mauricio, from the Falcon-Mauricio/Sumo_Damashi repository on GitHub. It is a 2-layer board of 60 × 50 mm with 21 parts on 40 nets, routed with 106 tracks and 0 vias.
Its parts include 13 connectors, 4 resistors, 1 IC, 1 diode and 1 transistor. It belongs with the computers and single-board computers boards and the ESP32 boards of this library.
Damashi es un robot de sumo autónomo diseñado para competir en la disciplina de Sumo autónomo organizada por la LNR.
| Especificación | Detalle |
|---|---|
| Dimensiones | 195x195x65 mm |
| Peso | ≤ 2600 g |
| Chasis | Impreso en 3D |
| Batería | LiPo 4S |
| Microcontrolador | ESP32 DevKit V1 |
| Sensores | 2 x QRE1113GR (tatami) + 5 x SHARP GP2Y0A02YK0F de distancia (laterales y frontales) |
| Motores | APYS SP6 - 260 RPM |
| Driver de motores | BTS7960 |
Entradas (sensores y botones)
|
Salidas (motores y otros)
|
1_hardware_pcb/ → Archivos de KiCad (PCB + esquemas)2_hardware_chasis/ → Archivos Free| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | Mounting_Hole | EESTN5:Separador_M3_5mm | P1, P2, P3 |
| 2 | 4K7 | EESTN5:R_1206 | R4, R5 |
| 1 | 10K | EESTN5:R_1206 | R3 |
| 1 | 220 | EESTN5:R_1206 | R2 |
| 1 | 2N7002 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | Aux 1 | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J4 |
| 1 | Aux 2 | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J7 |
| 1 | Buttons | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J2 |
| 1 | Buzzer | EESTN5:Buzzer_12mm | BZ1 |
| 1 | ESP32_DevKit_V1_CH9102X | EESTN5:ESP32_DevKit_V1_CH9102X | U1 |
| 1 | LED | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | D2 |
| 1 | Left | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | MOTOR_DER | EESTN5:Header_2x05x2.54mm_Vertical | P4 |
| 1 | MOTOR_IZQ | EESTN5:Header_2x05x2.54mm_Vertical | P5 |
| 1 | Mid | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J5 |
| 1 | Qre1113_Conn | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Horizontal | J10 |
| 1 | Right | Connector:FanPinHeader_1x03_P2.54mm_Vertical | J8 |
| 1 | STEP_DOWN | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Horizontal | J1 |

gusmanb/logicanalyzer
24 channel, 100Msps logic analyzer hardware and software

mntmn/amiga2000-gfxcard
MNT VA2000, an Open Source Amiga 2/3/4000 Graphics Card (Zorro II/III), written in Verilog


hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!

drandyhaas/KiCadRoutingTools
A set of Python/Rust tools to aid routing in KiCad

Arrow-air/project-quiver
Project Quiver documentation, designs, and project artifacts.


It measures 60 × 50 mm and has 2 copper layers, 1.6 mm thick.
21 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the Falcon-Mauricio/Sumo_Damashi repository on GitHub, at the commit this page was made from: the board is 1_hardware_PCB/MainBoard_Damashi/MainBoard_Damashi.kicad_pcb and its schematic 1_hardware_PCB/MainBoard_Damashi/MainBoard_Damashi.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask Falcon-Mauricio before reusing the design.